Zavio F531E User Manual - 8.2.2.  Alarm Sending

F531E & F731E User Manual 

8.2.2.  Alarm Sending 

Set to send the mail with connection to the alarm detection by the built-in motion 

detection function.

Select On to send the image file to SMTP server linked with the 

alarm detection. 

 Alarm sending: Select On to set to send mail with connection to the alarm 

detection. 

 File attachment:Set whether an image file is attached to the mail sent or 

not. When On is selected, the image file made by the settings below is 

attached. When Off is selected, only the message is sent. 

 Image file name: Type the file name you want to assign to the image to 

attach a mail. You can use up to 10 alphanumeric, - (hyphen) and _ 

(underscore) for naming.   

 Suffix: Select a suffix to add to the file name 

Date & time:The date & time suffix is added to the Image file name. 

The date/time suffix consists of lower two-digits of year (2 digits), 

month (2 digits), date (2 digits), hour (2 digits), minute (2 digits), 

second (2 digits), and consecutive number (2 digits), thus 14-digit 

number is added to the file name. 

Sequence number: A consecutive number of 10 digits between 

0000000001 and 4294967295 and two fixed digits 00 is added to the 

Image file name. 

Sequence number clear:Click  Clear  and the suffix of the sequence 

number returns 

50