ZBoost TRIO Pro ZBC775 Manual - page 10

zBoost

®

 TRIO Pro ZBC775 Manual

3

Preparing to Set Up Your zBoost Product

Tools Needed

The following tools are needed to set up your booster:

•

#2 Phillips screwdriver

•

Cellular phone operating in the band supported by your zBoost unit

•

Drill (may be required for outdoor or attic antenna placement)

Check for External Strength

Beforeplacingtheunitinyourhome,makesurethatyouhavereliablesignalandfast/reliabledata

speedsoutsideyourhome,intheattic,atrooflevelorwhereveryouplantoplacetheExternal

Antenna.zBoostcanonlybringsignalintoyourhomewhenitreachestheExternalAntenna.If

there is no signal, zBoost will not work for you.

If a weak signal is available at ground level, check the signal strength in your attic or at roof level 

locationwherethesignalwilllikelybestrongerandwheretheExternalAntennacanbeplacedfor

best performance.

If you have reliable, fast data speeds outside your home, then zBoost can bring the signal into your 

home.  

Note

Cellphonesignalbarsareapproximateandvaryfrom

phonetophone.Thenumberofbarscanfluctuate

widely, depending on the location of the phone, the 

position or angle of the phone, weather, etc. Most cell 

phone signal meters update every 6 to 10 seconds. An 

increaseofonlyonebartypicallyindicatesa4xto10x

signal increase.