Zears Z535 User Manual - 3.4 Charging The Battery
Zears
Z535
11
3.3 Power on/off the phone
To power on/ off the phone, press and hold the end key. If you have already enabled the
SIM Lock function then enter the PIN code (the 4 to 8 digit secret code of your SIM card).
It is preconfigured and provided to you by your network operator or retailer. If you enter an
incorrect PIN code 3 times in succession, your SIM card will be locked. To unlock it, you
must obtain a code from your network operator.
If the phone lock is enabled then you must enter the 4 to 8 digits phone lock code to
unlock the handset. By default this code is 1122.
3.4 Charging the Battery
Ensure the battery inserted in the handset. To charge the battery, plug in the charger
connector in your phone (USB interface) and then plug the other end into an AC power
socket.
The battery symbol indicates the charging status. While charging, the charge indicators
will scroll. When all the scroll bars are steady, the battery is fully charged. It takes about
several hours to fully charge the battery.
Disconnect the charger from the phone.
Disconnect the charger from the AC power socket.
3.5 Keypad Lock and Unlock
In the standby mode, touch the lock icon to lock the phone, slide screen to unlock the
phone.
3.6 Transfer files to the MicroSD card
The USB function of the phone can be activated no matter the phone is power on or off.
While being power off, the phone will enter resource manager directly after the USB cable
plugged in. While being power on, the phone will enter the window of “USB mode” after
the USB cable has plugged in.
Please select “Mass Storage” item. If the memory card has already been installed, you will
find memory card as removable disks on your PC. Download or upload the files to T-Flash
card.
Then you can access phone information from your PC, click it and enter to edit it.