Zebex Z-2121BTV2 Quick Installation Manual

Q

UICK 

I

NSTALLATION 

G

UIDE

Z-2121BT Quick Installation Guide 

Charging 

Quick Installation Guide for ZEBEX Z-2121 series 

Notice!  

When charging the battery for the first time, charge it for at least 12 hours 

Downloading Data 

Overview 

Before connecting Z-2121 series to PC, you will need to install the driver first. Please visit our website and download 

the device driver prior to below procedures. 

You can connect Z-2121 to PC using USB cable to download scanned data. 

1. 

Connect Z-2121 to your PC via USB. 

2. 

Go to Device Manager to find out the virtual COM port of your Z-2121 

3. 

Launch WinTaskGen and adjust the communication port accordingly. 

4. 

Go to Remote Setting >> Receive Data 

Data can also be downloaded wirelessly via Bluetooth. After scanning the data, do the 

following: 

1. 

Insert, or turn on the Bluetooth adaptor and make sure it’s function properly 

2. 

When you turn on Z-2121 series for the first time, you will be prompt to configure t

SPP Bluetooth connection. You will need to enter the BT address of the host device

pairing password (the default password is “12345678”). 

he 

 and 

If pairing is successfully, you will hear series of beeps and the process will bring you back to the home screen. 

3. 

At the home screen, press “right arrow” key on Z-2121 to establish Bluetooth SPP communication. 

4. 

When prompt for password on your PC, enter the pre-define password “12345678”. 

5. 

Launch WinTaskGen and select the corresponding COM port to download your data.