Z-3051hs / z3151hs handheld high-speed laser scanner service guide revision history changes to the original manual are listed below: version date description of version 1.0 aug. 19, 2010 initial release.
S ervice g uide preface important notice no warranty of any kind is made in regard to this material, including, but not limited to, implied warranties of merchantability or fitness for a particular purpose. We are not liable for any errors contained herein or incidental or consequential damages in c...
S ervice g uide radio notice this equipment generates uses and can radiate radio frequency energy. If not installed and used in accordance with the instructions in this manual, it may cause interference to radio communications. The equipment has been tested and found to comply with the limits for a ...
S ervice g uide table of contents preface..........................................................................................................................................................................2 important notice .........................................................................
S ervice g uide introduction with an impressive scanning speed, this scanner is a high-speed single line laser handheld scanner that brings about the most effective scanning capability any handheld scanner offers. Guaranteed to bring in efficiency for any retail, office or warehouse environment, it ...
S ervice g uide description function blue,red, green led reading status indication cable connection for interface communication cable connection exit window read barcodes buzzer sound hole for beep tone indication trigger trigger to make data capture pin hole use to remove the cable scanner parts th...
Z-3051hs / z-3151hs service guide 7 / 13 s ervice g uide no. P/n name quantity 1 600-430500-032 front cover 1 560-030500-683 560-030500-684 top case (white) top case (black) 1 689-100000-211 led light pipe 1 2 602-230500-141 led protective rubber 1 3 521-003000-8r0 self-tapping screw, m2- 8.0mm, rou...
S ervice g uide take apart b efore y ou s tart important instructions • read these instructions completely before you begin. • follow all instructions. • heed all warnings. Tools to prepare • philips screwdriver. Removing the top case 1. Remove the front cover from the scanner. 2. Next, remove the s...
S ervice g uide 3. Separate the top and the bottom cases and remove the dust cover. 4. Remove the fcc cable that binds the top and the bottom cases from the connector as circled in red. 5. The top case is now separated from the bottom case. Z-3051hs / z-3151hs service guide 9 / 13.
S ervice g uide 6. Rremove the screws from the led board using a screwdriver as pointed in red arrows. 7. Finally, remove the led board from the top case. Removing bottom case follow these steps to remove the bottom case after you have removed the top case. 1. Remove the fcc cable from the main boar...
S ervice g uide 2. Take out the engine from the bottom case. 3. Remove the cable connecting the main board and the buzzer board. 4. Unscrew the screws on the buzzer board as pointed in red arrows. Z-3051hs / z-3151hs service guide 11 / 13.
S ervice g uide 5. With screws removed, take out the buzzer board. 6. Take out the power board from the bottom case. 7. To remove the main board, unscrew the screws using a screwdriver as pointed in red arrows. Z-3051hs / z-3151hs service guide 12 / 13.
Z-3051hs / z-3151hs service guide 13 / 13 s ervice g uide 8. Finally, with screws removed, take out the main board from the bottom case..
