Z-3191le gun type handheld laser scanner service guide revision history changes to the original manual are listed below: version date description of version 1.0 june. 04, 2013 initial release.
S ervice g uide preface important notice no warranty of any kind is made in regard to this material, including, but not limited to, implied warranties of merchantability or fitness for a particular purpose. We are not liable for any errors contained herein or incidental or consequential damages in c...
S ervice g uide table of contents preface..........................................................................................................................................................................2 important notice .........................................................................
S ervice g uide introduction defy harsh environment with the new gun type laser scanner. Featuring elastic rubber protection and durable large size trigger users can operate the scanner with comfort and protection, even during prolonged periods of use. Embedded with zebex' most advanced decoding tec...
Z-3191le service guide 5 / 9 s ervice g uide scanner parts the scanner includes the following parts: no. P/n name quantity 602-2sshc0-681 protective rubber 4 1 863-319000-205 863-319000-206 top cover assembly (gray) top cover assembly (black) 1 540-d319x0-261 waterproof net for speaker 1 2 560-43190...
S ervice g uide take apart before you start important instructions • read these instructions completely before you begin. • follow all instructions. • heed all warnings. Tools to prepare • philips screwdriver. Please follow these steps to take apart z-3190. 1. Remove the screws from the scanner. 2. ...
S ervice g uide remove the laser engine from the scann base. 3. Remove the 4 screws pointed in red arrows. 4. Carefully remove the dust cover, buzzer sleeve, and trigger button assembly. Z-3191le service guide 7 / 9.
S ervice g uide 5. Remove the screw from the cable base cover. 6. Separate the cable base cover from the scanner base. 7. Carefully remove the screws, mylar tape, and ffc cable from the trigger board. Z-3191le service guide 8 / 9.
Z-3191le service guide 9 / 9 s ervice g uide 8. Remove the trigger button support and rubber trigger button..
