1. DL manuals
  2. Zebex
  3. Barcode Reader
  4. Z-3192BT
  5. User Manual

Zebex Z-3192BT User Manual

Manual is about: Wireless gun type 2D image reader

Summary of Z-3192BT

  • Page 1

    Wireless handheld gun type 2d image reader 1.

  • Page 2

    Wireless handheld gun type 2d image reader i u ser ’ s m anual revision history changes to the original manual are listed below: version date description of version 1.0 2012/11/01 initial release.

  • Page 3: Important Notice

    Wireless handheld gun type 2d image reader ii u ser ’ s m anual important notice no warranty of any kind is made in regard to this material, including, but not limited to, implied warranties of merchantability or fitness for any particular purpose. We are not liable for any errors contained herein n...

  • Page 4: Radio Notice

    Wireless handheld gun type 2d image reader iii u ser ’ s m anual radio notice this equipment generates uses and can radiate radio frequency energy. If not installed and used in accordance with the instructions in this manual, it may cause interference to radio communications. The equipment has been ...

  • Page 5: Wireless Communication

    U ser ’ s m anual wireless handheld gun type 2d image reader iv wireless communication z wireless technology operates 100m / 75m with communication cradle. Maximum communication range may vary depending on obstacles (person, metal, wall, etc.) or electromagnetic environment. Z the following conditio...

  • Page 6

    U ser ’ s m anual wireless handheld gun type 2d image reader v x bad host placement o good host placement at least 1 m 2. Move the access point (host/cradle) off the floor and away from walls and metal objects (such as metal file cabinets). Metal objects, walls, and floors will interfere with your w...

  • Page 7

    Wireless handheld gun type 2d image reader vi u ser ’ s m anual table of contents important notice..................................................................................................................Ii general handling precautions............................................................

  • Page 8: Introduction

    Wireless handheld gun type 2d image reader 1 u ser ’ s m anual introduction this scanner is a gun type rugged wireless 2d image reader with a state of the art image sensor. Featuring a superb scanning ability and able to withstand 1.5 meter drop, it is ideal for manufacturing and logistic sectors. T...

  • Page 9: Product Overview

    U ser ’ s m anual wireless handheld gun type 2d image reader 2 product overview scanner metal charging contacts led indicator exit window cradle function trigger/led indicator charging contacts host connector dc power connector buzzer trigger strap hole cable connector bluetooth address label.

  • Page 10: Scanner and Accessories

    U ser ’ s m anual wireless handheld gun type 2d image reader 3 scanner and accessories the scanner package contains: wireless scanner with battery / scanner cradle (optional) (with cradle) (without cradle) li-ion battery pack communication cable for cradle (optional) mini usb b to mini usb a cable 5...

  • Page 11: Battery Installation

    U ser ’ s m anual wireless handheld gun type 2d image reader 4 battery installation installing batteries the rechargeable batteries are packed individually for shipping safety. Please follow the steps below to install the batteries. Always use the rechargeable batteries provided by the manufacturer ...

  • Page 12: Installing Cable Clip

    U ser ’ s m anual wireless handheld gun type 2d image reader 5 installing cable clip cable clip is used to hold the mini usb cable in usb online mode. With the cable clip, you can easily transform your wireless scanner into a wired one. Attaching cable clip 1. Insert the cable clip to the strap hole...

  • Page 13

    U ser ’ s m anual wireless handheld gun type 2d image reader 6 removing cable clip 1. Detach the cable from the clip and detach the bottom part of the cable clip from the scanner handle. 2. Unhook the left part of the cable clip from the strap hole then turn it clockwise. While in turning motion, pu...

  • Page 14: Connecting The Cradle

    U ser ’ s m anual wireless handheld gun type 2d image reader 7 connecting the cradle the cradle host features wireless technology and is designed to support radio communication to the scanner. It can be used for both battery charging and radio communication. 1. Take the desirable interface cable and...

  • Page 15: Charging The Battery

    U ser ’ s m anual wireless handheld gun type 2d image reader 8 charging the battery the scanner offers two different ways to charge the battery: usb cable or cradle. To charge the battery using the cradle: 1. Connect the cradle. Please see connecting the cradle section for more details. 2. Place the...

  • Page 16: Power On The Scanner

    U ser ’ s m anual wireless handheld gun type 2d image reader 9 approx. Charging time: 5~6 hours z the scanner will power on automatically when charging. Z batteries shipped may not be full charged and should be fully charged for maximum charge capacity. Z recommended charging environment is temperat...

  • Page 17: How to Scan

    U ser ’ s m anual wireless handheld gun type 2d image reader 10 how to scan there are two ways to scan with this device. Z handheld scanning z presentation scanning handheld scanning 1. Power on the scanner. 2. Press the trigger and aim at the barcode as illustrated. 3. When decoding is successful, ...

  • Page 18: Cradle Host Mode

    U ser ’ s m anual wireless handheld gun type 2d image reader 11 radio communication host type this scanner support three radio communication types: z cradle host mode z spp master/slave mode z hid mode cradle host mode the scanner communicates with the host through the cradle and the cradle communic...

  • Page 19: Paging The Scanner

    U ser ’ s m anual wireless handheld gun type 2d image reader 12 paging the scanner 1. Ensure the cradle is properly connected to the host and led indicator is showing steady blue. 2. Press the function trigger on the cradle. You should hear the scanner make 3 beep sounds and blue led flash 3 times i...

  • Page 20: Visible Indicators

    U ser ’ s m anual wireless handheld gun type 2d image reader 13 visible indicators scanner there are 2 groups of led indicators on top of the scanner. These indicate the operational status of the scanner. Led status indication group_ 2 group_1 blue flashing waiting for radio connection (flash time 0...

  • Page 21: Cradle

    U ser ’ s m anual wireless handheld gun type 2d image reader 14 cradle cradle led led status indication red steady and blue continuous flashing cradle is radio disconnected and power from dc adaptor is lost. Steady red and blue cradle is radio connected. But lost dc power from the adaptor. Red and b...

  • Page 22

    U ser ’ s m anual wireless handheld gun type 2d image reader 15 ack/nak protocol or frame packing when scanner is in spp master/slave mode, and add in the data protocol or packing could confirm the data reliability. Refer to below for different setting options: a) no ack/nak protocol: b) ack/nak onl...

  • Page 23

    Wireless handheld gun type 2d image reader 16 u ser ’ s m anual scanner to remote application data format of packet to send a data (barcode) to the remote application, the bt scanner has to encapsulate it: eah (header) size of payload feh (format byte) data id data barcode type aeh (end of byte) res...

  • Page 24

    Wireless handheld gun type 2d image reader 17 u ser ’ s m anual barcode type table code value code39 0x11 codabar 0x01 code128 0x03 interleaved 2/5 0x02 code93 0x06 upc-e 0x14 upc-a 0x24 ean-8 0x34 ean-13 0x44 chinese post code 0x05 msi 0x07.

  • Page 25: Pin-Out Configuration

    Wireless handheld gun type 2d image reader 18 u ser ’ s m anual pin-out configuration scanner mini usb pin-out configuration pin 1. +5v pin 2. Usb_d- pin 3. Usb_d+ pin 4. Nc pin 5. Gnd cradle phone jack pin-out configuration rj 1. Rts_eia rj 6. Rx_ eia rj 2. Kb data / usb_d+ rj 7. Kb clock rj 3. Pc ...

  • Page 26: Cable Pin-Out

    U ser ’ s m anual wireless handheld gun type 2d image reader 19 cable pin-out 1. Keyboard wedge cable (for ps/2) pin-out configuration mini din (m) mini din(f) din function din function 1. Pc data 1. Kb data 2. N.C. 2. N.C. 3. Gnd 3. Gnd 4. +5v 4. +5v 5. Pc clock 5. Kb clock 6. N.C. 6. N.C. 2. Rs-23...

  • Page 27: Programming Guide

    U ser ’ s m anual wireless handheld gun type 2d image reader 20 programming guide program procedure using barcode manual 1. Power up the scanner. 2. Scan the start of configuration barcode. 3. Scan the barcode for the desired feature. Multiple features can be enabled/disabled before scanning the end...

  • Page 28: Default Parameters

    Wireless handheld gun type 2d image reader 21 u ser ’ s m anual default parameters the factory default setting table gives the default settings of all the programmable parameters. The default settings will be restored whenever the "reset" programming label is scanned and the scanner is in programmin...

  • Page 29

    Wireless handheld gun type 2d image reader 22 u ser ’ s m anual ean/upc enable code 39 enable code 32 disable codabar enable itf 2 of 5 enable msi disable chinese post code disable code 93 enable code 128 enable ean-128 disable telepen disable code 11 disable standard 2 of 5 disable industrial 2 of ...

  • Page 30

    Wireless handheld gun type 2d image reader 23 u ser ’ s m anual msi identifier code p code 11 identifier code o standard 2 of 5 identifier code s industrial 2 of 5 identifier code d gs1 databar identifier code rs gs1 databar limited identifier code rl gs1 databar expanded identifier code rx default ...

  • Page 31: Connecting To A Host

    U ser ’ s m anual wireless handheld gun type 2d image reader 24 connecting to a host the scanner provides several data transmit methods to communicate with the host. User may select the method according to their preferences. Read this section to learn the setups for connecting to different hosts. St...

  • Page 32: Cradle Host Mode

    U ser ’ s m anual wireless handheld gun type 2d image reader 25 start of configuration cradle host mode the scanner communicates with the host through the cradle. Typically, scanner and cradle in the same delivery box are paired and corresponded to host interface in factory. To check if the scanner ...

  • Page 33: Wireless Mode

    U ser ’ s m anual wireless handheld gun type 2d image reader 26 start of configuration wireless mode the scanner connects to the host via wireless connection. You may select spp master or spp slave for pc connection or select hid mode and smart phone mode for smart phone connection. Spp slave mode i...

  • Page 34

    U ser ’ s m anual wireless handheld gun type 2d image reader 27 start of configuration spp master mode in this mode, the scanner connects to the host /pc via wireless connection and performs like there’s a serial connection. In master mode, the scanner initiates the connection to the remote device ˁ...

  • Page 35

    U ser ’ s m anual wireless handheld gun type 2d image reader 28 start of configuration bt hid mode in bt hid mode, the scanner connects to the host /pc via wireless connection and performs like there’s a keyboard connection. The scanner initiates the connection to the remote device ˁ 1. Power on the...

  • Page 36

    U ser ’ s m anual wireless handheld gun type 2d image reader 29 start of configuration setting pin code 1. To change the pin code, use the “set pin code” setting. Default is “12345678”. 2. Use the ascii table in programming guide to input the new code (must be at least 4 digits and not more than 8 n...

  • Page 37

    U ser ’ s m anual wireless handheld gun type 2d image reader 30 start of configuration setting name 1. To change the name displayed when the scanner is discovered, scan the “friendly device name set” label. Default name is “zbbt”. 2. Use the ascii table in programming guide to input the name (max.12...

  • Page 38: Data Transnit Method

    U ser ’ s m anual wireless handheld gun type 2d image reader 31 start of configuration data transnit method the data transfer method includes three types: normal (default), out-of-range mode, and batch mode. Users may modify this setting according to their preferences. Normal when the scanner is wit...

  • Page 39

    U ser ’ s m anual wireless handheld gun type 2d image reader 32 start of configuration batch mode whether within the connection range or not, in batch mode, the scanner stores all scanned data that will be transferred to the host computer after scanning “send batch data” label. Number of storable ba...

  • Page 40

    U ser ’ s m anual wireless handheld gun type 2d image reader 33 start of configuration batch transfer use the settings in this section to setup batch transfer. Send batch data by scanning label scanning this label automatically exits you from the programming mode. Press and hold the trigger for over...

  • Page 41: System Function Settings

    U ser ’ s m anual wireless handheld gun type 2d image reader 34 system function settings default values are highlighted in grey background. Start of configuration barcode value description return scanner to factory defaults return cradle host to factory defaults return to usb default (communication ...

  • Page 42

    U ser ’ s m anual wireless handheld gun type 2d image reader 35 start of configuration barcode value description display firmware version abort (exit programming mode without any updates) scan mode trigger mode the scanner becomes inactive as soon as the data is transmitted. It must be triggered to ...

  • Page 43

    U ser ’ s m anual wireless handheld gun type 2d image reader 36 start of configuration radio communication setting cradle host mode cradle host mode enable enable cradle mode with this setup unlock pairing mode in this mode, the scanner can pair with another cradle when disconnected lock pairing mod...

  • Page 44

    U ser ’ s m anual wireless handheld gun type 2d image reader 37 start of configuration usb online mode usb online scan disable usb online scan enable usb online scan, ignore radio communication bt hid mode bt hid mode (combo keyboard) for apple mode (must execute bt hid mode first) spp master/slave ...

  • Page 45

    U ser ’ s m anual wireless handheld gun type 2d image reader 38 start of configuration default device name friendly device name set delete pin code confirm setting (for address, device name, and pin code setting required) required pair with slave (spp master) discover enable discover disable encrypt...

  • Page 46

    U ser ’ s m anual wireless handheld gun type 2d image reader 39 start of configuration data transmit mode data transmit normal out of range buffer enable batch mode send batch data by scanning label clear batch data after send clear batch data by scanning “delete batch data” label delete batch data ...

  • Page 47

    U ser ’ s m anual wireless handheld gun type 2d image reader 40 start of configuration radio protocol communication parameter radio protocol timeout= 3 sec radio protocol timeout= 5 sec radio protocol timeout =8 sec radio protocol timeout= 10 sec radio protocol timeout =13 sec radio protocol timeout...

  • Page 48

    U ser ’ s m anual wireless handheld gun type 2d image reader 41 start of configuration power off timeout parameter power off timeout=5 min power off timeout=10 min power off timeout=20 min power off timeout=30 min power off timeout=1 hr power off timeout : 2 hr power off timeout : 4 hr power off tim...

  • Page 49

    U ser ’ s m anual wireless handheld gun type 2d image reader 42 start of configuration power always on power off by scanning this label link beeper enable link beeper disable power-up beeper enable power-up beeper disable same code delay 50 msec 100 msec 200 msec 300 msec end of configuration.

  • Page 50

    U ser ’ s m anual wireless handheld gun type 2d image reader 43 start of configuration 400 msec 500 msec 600 msec 700 msec 800 msec 1000 msec infinite end of configuration.

  • Page 51

    U ser ’ s m anual wireless handheld gun type 2d image reader 44 start of configuration operation function setting good read beeper tone selection medium beeper tone high beeper tone low beeper tone speaker disable end of configuration.

  • Page 52

    U ser ’ s m anual wireless handheld gun type 2d image reader 45 start of configuration beeper duration selection long medium short ultra short ultra long end of configuration.

  • Page 53

    U ser ’ s m anual wireless handheld gun type 2d image reader 46 start of configuration vibration parameter (optional function, available only for customers of special request ) good read vibrator enable good read vibrator disable good read beeper and vibrator enable vibration duration=100msec vibrat...

  • Page 54

    U ser ’ s m anual wireless handheld gun type 2d image reader 47 start of configuration inter character delay 0 ms 2 ms 5 ms 10 ms 20 ms 50 ms inter message delay 0 ms 100 ms 500 ms 1000 ms end of configuration.

  • Page 55

    U ser ’ s m anual wireless handheld gun type 2d image reader 48 start of configuration interface settings 1. Rs-232c interface setting baud rate 115200 19200 9600 4800 2400 1200 parity bit even parity odd parity mark parity space parity none parity stop bit 1 stop bit 2 stop bit data bit 7 data bit ...

  • Page 56

    U ser ’ s m anual wireless handheld gun type 2d image reader 49 start of configuration handshaking protocol none handshaking ack/nak xon/xoff rts/cts enable beeper on character ignore beep on character ack/nak response time 300ms ack/nak response time 2 sec ack/nak response time 500 ms ack/nak respo...

  • Page 57

    U ser ’ s m anual wireless handheld gun type 2d image reader 50 start of configuration message terminator rs-232 message terminator—none rs-232 message terminator—cr/lf rs-232 message terminator—cr rs-232 message terminator—lf rs-232 message terminator—h tab rs-232 message terminator—stx/etx rs-232 ...

  • Page 58

    U ser ’ s m anual wireless handheld gun type 2d image reader 51 start of configuration 2. Keyboard wedge setting keyboard wedge setting ibm pc/at/ps/2 keyboard emulation international keyboard mode ( alt method) keyboard language support---usa keyboard language support---uk send scan code keyboard l...

  • Page 59

    U ser ’ s m anual wireless handheld gun type 2d image reader 52 start of configuration message terminator keyboard terminator---none keyboard terminator---enter keyboard terminator---h-tab end of configuration.

  • Page 60

    U ser ’ s m anual wireless handheld gun type 2d image reader 53 start of configuration 3. Usb interface setting usb interface international keyboard mode ( alt method) keyboard language support---usa keyboard language support---germany keyboard language support---french send scan code keyboard langu...

  • Page 61

    U ser ’ s m anual wireless handheld gun type 2d image reader 54 start of configuration 4. Wand emulation setting wand emulation is not supported as standard, if needed, please contact your distributor. (code128, code93 not supported) wand emulation all barcode will be decoded and transmitted in that...

  • Page 62

    U ser ’ s m anual wireless handheld gun type 2d image reader 55 start of configuration wand emulation (cont’d) wand emulation speed-----low y this option allows the transmission of wand emulation at 1ms narrow element width wand emulation speed-----medium y this option allows the transmission of wan...

  • Page 63

    U ser ’ s m anual wireless handheld gun type 2d image reader 56 start of configuration 5. Smart phone software keypad control setting smart phone software keypad control multi-media keyboard mode y this option enables multi-media keyboard mode software keypad enable/disable y this option enable or d...

  • Page 64

    U ser ’ s m anual wireless handheld gun type 2d image reader 57 start of configuration the symbologies 1. Codabar parameter setting barcode value barcode label description rc02 codabar enable rd02 codabar disable cb05 codabar start/stop character transmission Ёnone cb06 codabar start/stop character ...

  • Page 65

    U ser ’ s m anual wireless handheld gun type 2d image reader 58 start of configuration barcode value barcode label description cb13 no check character cb14 validate modulo 16,but don’t transmit cb15 validate modulo 16 and transmit cb18 codabar clsi editing enable when enabled, this parameter strips ...

  • Page 66

    U ser ’ s m anual wireless handheld gun type 2d image reader 59 start of configuration 2. Code 39 parameter setting barcode value barcode label description rc01 code 39 enable rd01 code 39 disable rc13 code 32 enable rd13 code 32 disable dc00 code 39 data redundant check=off dc01 code 39 data redund...

  • Page 67

    U ser ’ s m anual wireless handheld gun type 2d image reader 60 start of configuration barcode value barcode label description 3901 standard code 39 3902 full ascii code 39 3903 code 39 start/stop character transmission 3904 code 39 start/stop character without transmission 3905 code 39 check digit ...

  • Page 68

    U ser ’ s m anual wireless handheld gun type 2d image reader 61 start of configuration 3. Code 93 parameter setting barcode value barcode label description rc08 code 93 enable rd08 code 93 disable dc30 code 93 data redundant check=off dc31 code 93 data redundant check=1 dc32 code 93 data redundant c...

  • Page 69

    U ser ’ s m anual wireless handheld gun type 2d image reader 62 start of configuration 4. Code 128 parameter setting barcode value barcode label description rc06 code 128 enable rd06 code 128 disable rc10 ean-128 enable rd10 ean-128 disable dc40 code 128 data redundant check=off rc31 isbt-128 enable...

  • Page 70

    U ser ’ s m anual wireless handheld gun type 2d image reader 63 start of configuration 5. Chinese post code parameter setting barcode value barcode label description rc05 chinese post code enable rd05 chinese post code disable dc60 chinese post code data redundant check=off dc61 chinese post code da...

  • Page 71

    U ser ’ s m anual wireless handheld gun type 2d image reader 64 start of configuration 6. Msi/plessy parameter setting barcode value barcode label description rc14 msi enable rd14 msi disable dc70 msi data redundant check= off dc71 msi data redundant check=1 dc72 msi data redundant check=2 dc73 msi ...

  • Page 72

    U ser ’ s m anual wireless handheld gun type 2d image reader 65 start of configuration barcode value barcode label description ms11 msi check digit algorithm (mod10/mod10) two algorithms are possible for the verification of the second msi check digit. Select the barcode corresponding to the algorith...

  • Page 73

    U ser ’ s m anual wireless handheld gun type 2d image reader 66 start of configuration 7. Code 11 interface setting barcode value barcode label description rc07 code 11 enable rd07 code 11 disable 1101 code 11 maximum length setting 1102 code 11 minimum length setting set confirm to save this settin...

  • Page 74

    U ser ’ s m anual wireless handheld gun type 2d image reader 67 start of configuration 8. Itf 2 of 5 parameter setting barcode value barcode label description rc04 itf 2 of 5 enable rd04 itf 2 of 5 disable rc09 iata code enable rd09 iata disable rc32 convert itf 2 of 5 to ean-13 enable rd32 convert ...

  • Page 75

    U ser ’ s m anual wireless handheld gun type 2d image reader 68 start of configuration barcode value barcode label description it01 itf 2 of 5 code maximum length setting it02 itf 2 of 5 code minimum length setting it06 itf 2 of 5 one fixed length setting it07 itf 2 of 5 two fixed length setting set...

  • Page 76

    U ser ’ s m anual wireless handheld gun type 2d image reader 69 start of configuration 9. Standard 2 of 5 parameter setting barcode value barcode label description rc22 standard 2 of 5 code enable rd22 standard 2 of 5 code disable d051 standard 2 of 5 code maximum length setting d052 standard 2 of 5...

  • Page 77

    U ser ’ s m anual wireless handheld gun type 2d image reader 70 start of configuration 10. Industrial 2 of 5 parameter setting barcode value barcode label description rc21 industrial 2 of 5 code enable rd21 industrial 2 of 5 code disable d251 industrial 2 of 5 code maximum length setting d252 indust...

  • Page 78

    U ser ’ s m anual wireless handheld gun type 2d image reader 71 start of configuration 11. Upc/ean/jan parameter setting barcode value barcode label description rc11 ean convert to issn/isbn enable rd11 ean convert to issn/isbn disable rc03 upc/ean/jan enable rd03 upc/ean/jan disable ue01 upc/ean/ja...

  • Page 79

    U ser ’ s m anual wireless handheld gun type 2d image reader 72 start of configuration barcode value barcode label description ue10 add on 5 only ue11 add on 2 only ue12 add on 2 or 5 ue13 force upc-e to upc-a format enable ue14 force upc-e to upc-a format disable ue15 force upc-a to ean-13 format e...

  • Page 80

    U ser ’ s m anual wireless handheld gun type 2d image reader 73 start of configuration barcode value barcode label description ue23 transmit ean-8 check digit enable ue24 transmit ean-8 check digit disable ue25 transmit ean-13 check digit enable ue26 transmit ean-13 check digit disable ue27 transmit...

  • Page 81

    U ser ’ s m anual wireless handheld gun type 2d image reader 74 start of configuration barcode value barcode label description dc12 upc-a data redundant check=2 dc13 upc-a data redundant check=3 dc14 upc-e data redundant check=off dc15 upc-e data redundant check=1 dc16 upc-e data redundant check=2 d...

  • Page 82

    U ser ’ s m anual wireless handheld gun type 2d image reader 75 start of configuration barcode value barcode label description ue35 ean/upc +add-on mandatory for 978/977 bookland (supplement requirement, not sent for other) ue38 ean/upc +addon mandatory for 978/977 bookland (supplement requirement, ...

  • Page 83

    U ser ’ s m anual wireless handheld gun type 2d image reader 76 start of configuration barcode value barcode label description rc33 upce1 enable rd33 upce1 disable ue68 upce1 check digit transmit enable ue69 upce1 check digit transmit disable ue70 upce1 preamble off ue71 upce1 preamble system charac...

  • Page 84

    U ser ’ s m anual wireless handheld gun type 2d image reader 77 start of configuration 12. Telepen parameter setting barcode value barcode label description rc25 telepen enable rd25 telepen disable te03 telepen numeric mode enable te04 aim telepen enable end of configuration.

  • Page 85

    U ser ’ s m anual wireless handheld gun type 2d image reader 78 start of configuration 13. Matrix 2 of 5 parameter setting barcode value barcode label description rc12 matrix 2 of 5 enable rd12 matrix 2 of 5 disable d151 matrix 2 of 5 maximum length setting d152 matrix 2 of 5 minimum length setting ...

  • Page 86

    U ser ’ s m anual wireless handheld gun type 2d image reader 79 start of configuration 14. Gs1 databar parameter setting there are 7 kinds of barcodes in the gs1 databar family and they are categorized into three groups. Barcode types in the same group use the same barcodes for setting. Group repres...

  • Page 87

    U ser ’ s m anual wireless handheld gun type 2d image reader 80 start of configuration gs1 databar limited (formally rss limited) barcode value barcode label description rc16 gs1 databar limited enable rd16 gs1 databar limited disable ss10 transmit gs1 databar limited check digit ss11 don’t transmit...

  • Page 88

    U ser ’ s m anual wireless handheld gun type 2d image reader 81 start of configuration gs1 databar expanded (formally rss expanded) barcode value barcode label description rc17 gs1 databar expanded enable rd17 gs1 databar expanded disable ss07 gs1 databar expanded/ean-128 emulation enable ss06 gs1 d...

  • Page 89

    U ser ’ s m anual wireless handheld gun type 2d image reader 82 start of configuration 15. Postal codes setting barcode value barcode label description rc35 us postnet enable rd35 us postnet disable rc36 us planet enable rd36 us planet disable rc37 transmit us postal check digit enable rd37 transmit...

  • Page 90

    U ser ’ s m anual wireless handheld gun type 2d image reader 83 start of configuration barcode value barcode label description rc40 japan postal enable rd40 japan postal disable rc41 australian postal enable rd41 australian postal disable rc42 dutch postal enable rd42 dutch postal disable rc43 4stat...

  • Page 91

    U ser ’ s m anual wireless handheld gun type 2d image reader 84 start of configuration 16. Composite setting barcode value barcode label description rc45 composite cc-c enable rd45 composite cc-c disable rc46 composite cc-a/b enable rd46 composite cc-a/b disable rc47 composite tlc-39 enable rd47 com...

  • Page 92

    U ser ’ s m anual wireless handheld gun type 2d image reader 85 start of configuration 17. 2d setting barcode value barcode label description rc48 pdf417 enable rd48 pdf417 disable rc49 micropdf417 enable rd49 micropdf417 disable rc50 code128 emulation enable rd50 code128 emulation disable rc51 data...

  • Page 93

    U ser ’ s m anual wireless handheld gun type 2d image reader 86 start of configuration barcode value barcode label description rc52 maxicode enable rd52 maxicode disable rc53 qr code enable rd53 qr code disable rc54 microqr enable rd54 microqr disable rc55 aztec enable rd55 aztec disable end of conf...

  • Page 94

    U ser ’ s m anual wireless handheld gun type 2d image reader 87 start of configuration 18. Symbology-specific security levels barcode value barcode label description sl00 security level 0 the decoder offers four levels of decode security for delta bar codes, which include the code 128 family, upc/ea...

  • Page 95

    U ser ’ s m anual wireless handheld gun type 2d image reader 88 start of configuration 19. Micropdf features barcode value barcode label description mp03 transmit micropdf control header enable when enabled, this activates transmission of the control header, which contains the segment index and the ...

  • Page 96

    U ser ’ s m anual wireless handheld gun type 2d image reader 89 start of configuration 20. Imager preferences barcode value barcode label description ip00 decoding autoexposure enable select enable decoding autoexposure to allow the se4500 to control gain settings and exposure (integration) time to ...

  • Page 97: Data Editing

    U ser ’ s m anual wireless handheld gun type 2d image reader 90 start of configuration data editing 1. Identifier code barcode value barcode label description is00 disable identifier code is01 enable identifier code table as factory standard is03 enable identifier code table as aim standard. Ci01 co...

  • Page 98

    U ser ’ s m anual wireless handheld gun type 2d image reader 91 start of configuration barcode value barcode label description ci08 codabar identifier code setting ci09 code 128 identifier code setting ci10 code 93 identifier code setting ci11 msi identifier code setting ci12 gs1 databar omnidirecti...

  • Page 99

    U ser ’ s m anual wireless handheld gun type 2d image reader 92 start of configuration 2. Header and trailer barcode value barcode label description cp11 add code length as header enable (2 digits) cp12 add code length as header disable (2 digits) ht01 header (preamble) ht02 trailer (postamble) ht03...

  • Page 100

    U ser ’ s m anual wireless handheld gun type 2d image reader 93 start of configuration full ascii code 39 table code 39 ascii hexa - code code 39 ascii hexa- code full ascii ---nul 00 full ascii ---si function key-----“shift” 0f full ascii ---soh function key-----“ins” 01 full ascii ---dle function ...

  • Page 101

    U ser ’ s m anual wireless handheld gun type 2d image reader 94 start of configuration full ascii code 39 table (continued) code 39 ascii hexa- code code 39 ascii hexa- code full ascii ---rs function key-----“ctl(l)” 1e full ascii ---- 2d full ascii ---us function key-----“alt(l)” 1f full ascii ---....

  • Page 102

    U ser ’ s m anual wireless handheld gun type 2d image reader 95 start of configuration full ascii code 39 table (continued) code 39 ascii hexa- code code 39 ascii hexa- code full ascii --- 3c full ascii ---k 4b full ascii ---= 3d full ascii ---l 4c full ascii ---> 3e full ascii ---m 4d full ascii --...

  • Page 103

    U ser ’ s m anual wireless handheld gun type 2d image reader 96 start of configuration full ascii code 39 table (continued) code 39 ascii hexa- code code 39 ascii hexa- code full ascii ---z 5a full ascii ---i 69 full ascii ---[ 5b full ascii ---j 6a full ascii ---\ 5c full ascii ---k 6b full ascii -...

  • Page 105

    Wireless handheld gun type 2d image reader 98 u ser ’ s m anual appendix 1: usb virtual com driver installation contact your distributor to get the driver and follow the steps below to enable usb virtual com port. 1. Connect the handheld scanner and the host (e.G. A pc) with a usb interface cable. 2...

  • Page 106

    U ser ’ s m anual wireless handheld gun type 2d image reader 99 appendix 2: barcode length setting introduction the length of a barcode is the number of characters it contains, including check digits. As listed in the default parameters section, each barcode type has different default length. You ma...