Zebra TTPM2 Manual - page 9
February, 2009
TTPM2 Selection Guide
9
2.2.2
Rear ticket guide, control panel, and 5 V regulator option for OEM printers
In kiosks where the printer is only accessible from behind it is a clear advantage to have
the controls and the power connector facing backwards. This option also gives a smooth
ticket path into the printer when you have the ticket stock below the printer. The built in
5 V regulator makes the printer more tolerant to long cables between the power supply
and the printer, and makes it possible to use a single voltage power supply.
Figure 4
A) Rear switch and ticket guide option No. 104273.
B) This panel us also available without the
green/yellow/red buttons on part No, 102531
C) 103774 is the same as 102531 but without the
ticket guide part.
2.2.3 Instruction
label
This self-adhesive label clarifies the use of buttons and the meaning of the indicators of
the desktop printer.
It is available in two versions, one for single and dual entry versions, and one for CD200
card dispenser versions.
Error
ON
Load
ticket
from
hopper
Feed
Ticket
Out of
Tickets
Clear
Jam
Error
ON
Eject
Ticket
Feed
Ticket
Out of
Tickets
Clear
Jam
Figure 5 Label for normal and CD200 versions.
Order No. 01715-000 for normal and 01715-001 for CD200.