Zeck Audio DCA500 Owner's Manual - Dca 500 Owner`s Manual
Konzeption und Kombinations-
m ö g l i c h k e i t e n
Der DCA 500 ist konzipiert als kompakter aktiver Subwoofer
mit den Maßen 62 x 62 x 35 cm, passend zu den Systemen
P A 15/3, PA 15/3 Proline, PA 1504 Coax, PA 12/3, PA 1 2 / 3 P r o-
line. Für diese Systeme ist der DCA 500 über die Grundfläche
von 62 x 35 cm direkt stapelbar. Für die Kombination mit
P A 12/3 oder PA 1 2 / 3 Proline empfehlen wir die Verwendung
von Doppelhochständerrohren DHS.
Neben diesen Kombinationsmöglichkeiten kann der DCA 5 0 0
natürlich auch mit allen anderen Mittelhochtonsystemen (z.B.
P A 12/2, PA 1 2 / 2 Proline, PA 210/2) und vor allem mit den spe-
ziell dazu entwickelten Satelliten TMS 300 kombiniert werden.
A u s s t a t t u n g
Der DCA 500 verfügt über eine integrierte Endstufe von 500 W
Dauerleistung, eine prozessorgesteuerte Baßkompensation mit
dynamischem Limiter sowie eine Stereo-Aktivweiche mit Trenn-
frequenz 180 Hz / 18 d B / O k t .
Die dyloc-Baßkompensation korrigiert das Einschwingverhalten
des Tieftöners und simuliert ein wesentlich größeres Boxen-
g e h ä u s e .
Der dynamische Limiter ist zur Kontrolle des typischen Live-
Betriebs konzipiert. Er begrenzt die reine Sinus-Dauerleistung
auf ca. 350 W, die intermettierende, dem Live-Betrieb entspre-
chende Baßleistung auf ca. 500 W und läßt Dynamikspitzen bis
zu 800 W zu. Dieser dynamische Limiter ist der eigentlichen
Power-Endstufe vorgeschaltet und verhindert deren Übersteue-
rung (clipping).
Die eingebaute Aktiv-Stereoweiche trennt bei 180 Hz mit
1 8 dB/Oktave. Diese Trennfrequenz ermöglicht die Kombination
mit allen gängigen 10”-, 12”- und 15”-Systemen sowie der Zeck
T M S 3 0 0 .
Die Ein- und Ausgänge der Aktivweiche sind symmetrisch (XLR
oder Stereo-Klinke) ausgelegt und werden bei Belegung mit
Mono-Klinke automatisch unsymmetrisch. Zur Vereinfachung
der Verbindung mit Powermixern ist pro Kanal ein unsymmetri-
scher IN/HIGH OUT in Form einer Stereo-Klinke vorhanden
(siehe Anschlußbeispiele im folgenden).
An dem Speakon-Anschluß “Speaker out” kann eine zweite pas-
sive 18”-Box angeschlossen werden; die Impedanz dieser zwei-
ten passiven Box darf jedoch 8 Ohm nicht unterschreiten. Wir
empfehlen hierfür die Zeck LF 18/500, welche die gleichen
Abmessungen wie der DCA 500 besitzt und ebenfalls mit dem
J B L 2 2 4 1 H bestückt ist.
Technische Daten / Specifications DCA 5 0 0
Nennleistung / Continuous output power
500 WRMS
Musik-Impulsleistung / Continuous program
800 W
Frequenzumfang / Frequency Range
30-250 Hz
Trennfrequenz / Crossover frequency
180 Hz
Flankensteilheit / Slope
18 dB/Okt.
Abmessungen / Size
62 x 62 x 35 cm
Gewicht / Weight
42 kg
Zweitlautsprecher-Anschluß / 2nd speaker out 8 Ohm min.
So long - viel Spaß mit Zeck !
Concept and combinations
The DCA 500 is a compact, active subwoofer, measuring
62 x 62 x 30 cm and can be matched with PA 15/3,
PA 15/3 Proline, PA 1504 Coax, PA 12/3, PA 12/3 Proline
speaker units. These units can be stacked on top of the
DCA 500, although we recommend the DHS twin-tube stands
for the 12/3 models.
Apart from those combinations, other mids/trebles units such as
the PA 12/2, the PA 12/2 Proline or the PA 210/2 are highly sui-
table and, of course, the TMS 300 satellite unit, which was spe-
cially designed for combination with the DCA 500.
Equipment
The DCA 500 has an integrated power amp with a continuous
power rating of 500 Watts, processor controlled bass compen-
sation with a dynamic limiter and an active stereo crossover
with a crossover frequency of 180 Hz, 18 dB/octave.
Dyloc bass compensation corrects the woofer`s oscillation
behavior and simulates a considerably larger bass cabinet.
The dynamic limiter is designed to control typical live operation.
It limits the purely continuous performance to about 350 Watts,
keeps the live, intermittent basses to 500 Watts and allows
dynamic peaks up to 800 Watts. This dynamic limiter is wired
before (pre) the actual power amplifier and prevents it from clip-
ping.
The integrated active stereo crossover seperates at
180 Hz:18 dB/octave and allows combinations with 10", 12"
and 15" units as well as Zeck`s TMS 300.
The active crossover`s inputs and outputs are balanced (XLR
or stereo jack) and automatically become unbalanced when a
mono jack is connected. An unbalanced IN/HIGH OUT stereo
jack connection is provided at each channel for simple connec-
tion with power mixers (see following connection examples).
A second , passive 18" unit can be connected to the Speakon
socket "speaker out" as long its impedance is not less than
8 Ohms. We recommend Zeck`s LF 18/500 which is the same
size as the DCA 500 and is also equipped with the JBL 2241 H
woofer.
DCA 500 owner`s manual
4
owner`s manual DCA 500 © Zeck Music