Summary of DX 2202
Page 1
User´s manual digital satellite receiver dx 2202 english.
Page 2
- 2 -.
Page 3: Table of Contents
- 3 - table of contents 1. General information ..................................................................... 5 1.1 main features............................................................................................. 5 1.2 safety instructions................................................
Page 4
- 4 - 6. General viewing functions ....................................................... 20 6.1 select channel ......................................................................................... 20 6.2 previous channel recall .....................................................................
Page 5
- 5 - 1. General information the dx 2202 allows you to view a variety of satellite programs. This user’s guide covers the installation of the dx 2202and the necessary steps to operate various features. It also explains special features available only in this dx 2202 in detail, and will allow you to ...
Page 6
- 6 - 1.2 safety instructions the following section contains important information relating to operation, place of installation and connecting-up of the receiver. Read these notes carefully before putting the unit into operation. Important notes regarding operation • extended absence / thunderstorms...
Page 7
- 7 - • solar radiation/heat do not place the receiver close to radiators nor expose it to direct sunlight. • grounding the parabolic antenna is to be grounded in accordance with regulations. Here, the relevant german vde regulations (or equivalent) are to be observed. Connecting up and putting into...
Page 8
- 8 - 1.5 remote control unit key function turns power on/off of the dsr. When watching a channel, enables/disables the audio. 0~9 enter number of the required menu item or select a channel number to watch . Menu press this key one time to run menu on screen, and call command box. Exit returns to th...
Page 9
- 9 - 1.6 front panel figure 2: front panel key function power turns on and off the power of the receiver (standby). Pr v/Λ when watching, changing to the previous and next channel, or moves to the next higher or lower item in the menu 1.7 rear panel power on/off connect to a pc for software upgrade...
Page 10
- 10 - 2. Installation of dx 2202 this section explains the installation of dx 2202. Refer to the manuals supplied with the equipment for the installation of outdoor equipment such as the dish antenna. When adding new equipment, be sure to refer to the related parts of the manual for the installatio...
Page 11
- 11 - 2.3 connecting to digital amplifier dolby digital amplifier satellite receiver.
Page 12
- 12 - 3. Menu information once you have installed and connected the cables of the dx 2202, the menu is displayed. This menu consists of 4 main menus as shown below. • channel manager (chapter 7) • installation (chapter 4) • preferences (chapter 5) • timer (chapter 9) during the installation the ok ...
Page 13
- 13 - 4. User installation this menu consists of 5 sub-menus as shown below. • antenna settings • automatic search • manual search • motor setting • factory default 4.1 antenna settings 1. Satellite name: select first satellite you want. 2. Transponder: select desired transponder.Press ok key will ...
Page 14
- 14 - 4.2 automatic search: in this menu after pressing white button you can select nit search on or off, as well as only free channels, only scrambled channels (cas) or all. Select search channel mode. Than press blue button, the dsr will automatic search as shown below: in this menu, press ok key...
Page 15
- 15 - 4.3.1 add transponder in manual search menu, press add tp key (white colour key) on the rcu, the screen will display a submenu, in this sub menu, you can add the frequency and symbol rate, select hor or ver polarization mode to add new transponder. 4.3.2 delete transponder delete tp : if you ...
Page 16
- 16 - recalculate all positions : when all the locations of searched satellites are shifted for any reason, you can realign all of them once you adjusted one satellite location. Goto reference: when you install the motor of diseqc 1.2 antenna, you can select this function to move the center of the ...
Page 17
- 17 - 5.1.System options 1. Osd language: select osd language out of about 8 languages. 2. Osd transparence: set osd transparence from 1 to 10. 3. Osd timeout: set osd timeout from 1 sec to 10 sec for automaticly fade out osd. 4. Remote system: you can set to code b if you have a dual remote contro...
Page 18
- 18 - 5.5 parental control this function allows you lock the channel with a password in order to prevent children from accessing the channel. You can also protect your installed data and information using the install lock. How to change the password: enter the current password. 2. Select on of pare...
Page 19
- 19 - 5.6 software- update via satellite because of continuous changes in dvb broadcasting it is also necessary to update your receivers software to be every time on the height of the time. Therefore zehnder company offers actual upgrade software files on their homepage www.Zehnder-sat.De to downlo...
Page 20
- 20 - 6. General viewing functions the following describes the basic functions of your dx 2202 while watching satellite tv or listening to satellite radio. 6.1 select channel if you want to select channel, use ch keyon the front panel or pr+, pr- key on the rcu or numeric keys. In addition to the a...
Page 21
- 21 - 6.6 favorite list to call a favorite group list press key on the rcu. You can access the next of 8 favorite groups when you press the blue button. The method to group favorite channels is explained in the favorite channel (page 23). 6.7 volume & audio control 1. Volume control to increase or ...
Page 22
- 22 - 6.9 pause the frame press pause button (blue button) on the rcu to pause the screen. To bring it back to the normal mode, press pause key once again. 6.10 zoom details of picture this function allows to zoom into details of a tv picture. 1. To show the zoom marks press zoom button (white butt...
Page 23
- 23 - 6.12 position if you need to adjust the antenna more accurately, press key on the rcu and the position menu will be displayed. Go to “move” and press key on the rcu to adjust the motor driven antenna. 6.13 sat if you searched channels from more than one satellite and want to have a channel li...
Page 24
- 24 - 7. Channel manager dx 2202 provides one of the most powerful channel managing functions in the world. This function not only allows you to watch channels but also do a lot of interesting and useful things. 7.1 channel manager channel manager consists of edit channel and set favorites, which c...
Page 25
- 25 - 7.4 rename channel in the main page, press rename key (white color key) on the rcu. This rename command allows you to rename the channel. First select the channel to be renamed and press ok key, then a keypad dialog box will be displayed. Enter the desired name. Check whether the channel name...
Page 26
- 26 - 7.7 favorite channel when you select channel manager and then set favorites menu the list will be shown on screen as name “favorite”. Press fav key repeatedly to switch between 8 different favorite groups as news, sports, kids, movies, music, science, fashion. Select your favorite channel and...
Page 27
- 27 - 8. Epg (electronic program guide) dx 2202 provides epg function for you to get access to the tv guide (or radio guide if you are listening to radio channels) that will show the titles and other information of the current and next programs on different channels. The information is only availab...
Page 28
- 28 - 9. Timer in this menu you can program the timer in various ways. This function is one of the strong points of dx 2202. One basic condition for the correct operation of this function is the correct time displayed at the top right of the timer menu window. Time adjust usually you get the inform...
Page 29
- 29 - 10. Front panel display : up load procedure : down load procedure : error in data transmitting : system waiting : flash rom error : system booting : tv mode : vcr mode.
Page 30
- 30 - 11. Software-update via rs 232 for this receiver you can download new software from zehnder homepage http://www. Zehnder-sat.De to up-grade your receiver with new operating system and new channel list by using rs232 interface and programm editor „credit “ . Find at support area ´download //so...
Page 31
- 31 - 5. Call “software_upgrade” menu from main menu and select „upgrade applikation“ 6. You can see file window. Select and open the „rom.Bin“ file to be upgraded. 7. During the download, your pc and front panel of the receiver will display the procedure situation. 8. After completed download, the...
Page 32
- 32 - 12. Easy plug-and-play data transfer without pc below you can find another easy method to upgrade operating software by easy plug-and-play data transfer from one receiver to the other. 1. Notice that both receivers, master and slave, are powered off . 2. Connect one receiver to another receiv...
Page 33
- 33 - 13. Trouble shooting bad picture / blocking error. Problem possible causes what to do no sound or picture, but the front panel red light is on. No sound or picture. The srs-5518-gb is in standby mode. The satellite dish is not pointing at the satellite. No singal or weak signal. Adjust the di...
Page 34
- 34 - no picture appears on the tv scree. There is interference on your digtal satellite channels. The rcu is not working. The systen is connected by scart leads and tv is not in av/ext mode. The systen is connected using rf leads. Battery exhausted. Rcu is incorrectty aimed. If the system is conne...
Page 35
- 35 - 14. Specifications cpu & memory cpu cx24142 processing speed 133mhz program memory (flash) 1 mbyte decoding memory( ram) 8 mbyte tuner & channel connector 2 x f-type, 3/8-32unef-2a 1 if loop through yes frequency range 950 to 2150 mhz digital signal input level -25 to -65dbm lnb supply 13.0v ...
Page 36
- 36 - heinrich zehnder gmbh tel. 07729/881-0 satelliten-empfangstechnik fax 07729/881-72 weierhalden 37/1 http://www.Zehnder-sat.De d-78144 tennenbronn / germany e-mail: info@zehnder-sat.De 03.06 Änderu nge n vorbehalten!.