Summary of Nova Neo
Page 1
Cooling fresh air clean air heating zehnder nova neo manual.
Page 3
3 1. Installing your appliance 6 1.1 positioning the appliance 6 1.2 connecting the appliance 7 1.3 radiator installation restrictions 7 2. Using your appliance 8 2.1 the radiator functions 8 2.2 recommendations for heat mode 11 2.3 recommendations for refresh mode 11 3. Taking care of your applianc...
Page 4
4 your appliance is a central heating radiator with a built-in forced convection function. When this function is activated, this quiet, compact and easy-to-use appliance provides additional airflow to maximise heat output. Your radiator is equipped with a number of three-speed fans to boost heat out...
Page 5
5 general & warning this appliance is not intended for use by persons (including children) with impaired physical, sensory or mental capacities, or by persons lacking in experience or knowledge, unless they are supervised by, or have received prior instruction in using the appliance from, a person r...
Page 6
6 1.1 positioning the appliance to get the most out of your appliance and enjoy the highest standards of comfort, we recommend that you install the appliance near places of high heat loss (windows, doors, etc.) wherever possible. Use mounting screws suitable for your wall. Important: this radiator m...
Page 7
7 installing your appliance 1.2 connecting the appliance the technical specifi cations of your appliance are shown on the name plate, which is located on the side of the appliance towards the bottom. Please take note of these before installing the appliance. When connecting the appliance to the mains...
Page 8
8 2.1 the radiator functions the built-in control panel (see opposite) has the following functions: turn the forced convection function on/off. Press the on/off button (2) to enable or disable the fans. The green led (1) is illuminated when the fans are switched on. Select fan speed (leds, 4). Press...
Page 9
2 3 4 5 1 9 using your appliance filter alarm the red led (5) will light up periodically to remind you to clean the airflow filter at the bottom of the appliance (see section 3.2). Sensor alarm the same red led (5) will blink in the event of a sensor fault. If so, further action is required: contact...
Page 10
10 automatic heat/refresh mode selection a sensor inside your radiator monitors the temperature of the hot/cold water supply. Another sensor measures the ambient temperature in your room. Heat mode is selected automatically if the water temperature rises above the minimum heat mode temperature: ≥ 25...
Page 11
11 using your appliance 2.2 recommendations for heat mode maximum water temperature in your appliance to ensure optimum service life of the components of your appliance, the temperature of your water supply should be limited to a maximum of 75ºc. Thermostatic valve (optional, not included) in heatin...
Page 12
12 taking care of your appliance 3.1 standard maintenance operations before carrying out any maintenance operation on your appliance, ensure that it is switched off. High-quality materials and surface treatment protect your appliance against corrosion and impacts. To maximise the service life of you...
Page 13
1 2 3 4 13 in case of fault if the fans stop working, check that your appliance is properly connected to an appropriate power supply (see section 1.2). The alarm led (5) lights up when a fault is detected and goes out when the fault is cleared (see section 2.1). If the led remains on, further action...
Page 14
14 after-sales service if your appliance stops working or if you require spare parts, contact your installer or dealer. Prior to making contact and to ensure your problem is dealt with quickly and effectively, please make a note of: the details shown on the appliance nameplate (see section 1.2), the...
Page 15
Www.Zehnder-systems.Com v1110, imprimé par alliance partenair es graphiques.