1 carl zeiss lightweight zoom lwz.2 mount change instructions.
5 4. Now you see the colored shims in the groove of the black lens barrel. 5. Important note: please do not remove the screws which are beneath the colored shims. This would end in a readjusted lens. 6. Now place the pl mount on the lens in such a way that the groove on the underside of the pl mount...
7 3. Activate the live view of your camera. 4. Set the distance of 1.5m on the lens focus ring and use the zoom level at 45mm. This setting must not be changed during the adjustment process. 5. Set the largest aperture of t 2.6 on the aperture ring. 6. Obtain maximum image sharpness on the live view...
8 12. Change the shims as indicatedin the tables in the appendix (page 9) by using a flat-bladed screw-driver or a pair of tweezers. 13. Please lign up the ef mount with the ef adapter that the four screw holes are lying upon each other. 14. Now place them on the lens in such a way that the groove o...
10 tables for adjusting the flange focal distance of a lightweight zoom lwz.2 lens key • minus sign: shims must be removed • plus sign: shims must be added lightweight zoom lwz.2 15.5-45mm / t2.6 please note: this table is only valid for the zoom level of f=45mm. Meter distance scale feet distance s...
11 lightweight zoom lwz.2 – accessories and spare parts accessories/spare parts carl zeiss ident-no. Interchangeable mount set pl 1867-925 interchangeable mount set ef 1867-926 interchangeable mount set mft 1893-185 carl zeiss lwz.2 transport case 1890-874 front lens cap ef/pl/mft 0097-227 rear lens...
En_10_070_718i printed in germany cz -iv/2011 subject to change. For further information, please contact us: carl zeiss ag camera lens division 73446 oberkochen germany cine@zeiss.De www.Zeiss.Com/cine.
