Zeiss Stemi 305 cam Operating manual - page 18
ZEISS
INSTALLATION
Stereo microscope
General information
Stemi 305 cam
16
435063-9044-008
03/2015
Engl
ish
3
INSTALLATION
3.1
General information
Before installing and commissioning the device, make sure to read the
carefully (see section 1.2, Page 3).
The Stemi 305 cam with the necessary tools and optional equipment is delivered in several standard
packages.
•
Take all units out of the packaging and check them for completeness according to the delivery note.
For installation and / or transport of the microscope or the stand, exclusively use the handle
4
) provided to this effect.
•
Remove transport securing devices (adhesive tapes etc.).
•
Keep original packaging for a possibly extended period of storage or return of the device to the
manufacturer or dispose of it appropriately.
3.2
Connecting stereo microscope to
the power supply
•
Insert the mains cable (Fig. 5/
2
) in the mains
supply socket (Fig. 5/
1
) of the stand.
•
Connect the mains cable (Fig. 5/
2
) to a mains
supply socket outlet.
3.3
Switching stereo microscope ON or
OFF
•
Use the power switch (Fig. 5/
3
) to switch the
stereo microscope ON or OFF.
Utilization and configuration of the
Stemi 305 cam body (with integrated
camera) has been described in section 4,
as of page 17.
Fig. 5
Connecting the stereo microscope