Z e k t o r home theater switches digital video / component video / multichannel audio rev 2 02/22/2006 high definition component video switch 1 2 3 4 zektor hds4.1.
Ii hds4.1 component video switch hds4.1 component video switch thank you for your purchase of your hds4. High definition compo - nent video switch. Ever y care has been taken to assure you of a successful installation and subsequent operations of your new hds4. Video switch, however should something...
2 hds4.1 component video switch hds4.1 component video switch 1 2 3 4 5 6 1 2 3 4 5 front panel controls: power indicator. Lights up in standby mode. Selection leds. Indicate currently selected inputs. Input selection buttons. Infrared remote sensor window. Infrared received indicator. Flashes when ...
4 hds4.1 component video switch hds4.1 component video switch step 1... Use the analog input connections to switch component video / composite video / analog audio or any combination of the above signals to the hds4.’s analog output connec- tors. Use the digital audio connectors to switch digital au...
6 hds4.1 component video switch hds4.1 component video switch three simple steps to a remote! The hds4. Features zektor ’s exclusive intelligent-ir™, and with ver y few exceptions can be setup to use any remote you can point at it! Pick a remote, any remote! Star t by pick ing the remote you’d like ...
Hds4.1 component video switch hds4.1 component video switch controlling the front panel lights there are four different front panel light modes available on the hds4.. They are: front panel lights automatically fade from bright to dim after 4 seconds of inactivity. Front panel lights are always at t...
0 hds4.1 component video switch hds4.1 component video switch 1 2 3 4 zektor step 1: place the hds4.1 into the setup mode press and hold the power button for 4 secs. The standby led will blink wildly, and the selection leds will start sequencing to the right. Step 2: select “front panel intensity” o...
2 hds4.1 component video switch hds4.1 component video switch 1 2 3 4 zektor step 1: set the hds4.1 to the preferred initial power on state setup the hds4. To the initial power on state you’d prefer. Step 2: save the new initial power on state 1 2 3 4 zektor start by pressing and holding the power b...
4 hds4.1 component video switch hds4.1 component video switch step 1: enter the enable / disable control state 1 2 3 4 zektor start by pressing and holding the power button... 1 2 ...While continuing to hold the power button, press and hold the ‘4’ button. After about 4 seconds, the standby led will...
6 hds4.1 component video switch hds4.1 component video switch step 1: reset all parameters to factory defaults 1 2 3 4 zektor start by pressing and holding the power button... 1 2 ...While continuing to hold the power button, press and hold both the ‘2’ and the ‘’ buttons. After about 4 seconds, the...
Hds4.1 component video switch hds4.1 component video switch specifications specifications: analog channels bandwidth @ -0.1db: bandwidth @ -3db: resolution: input coupling: output coupling: digital audio channels inputs: outputs: maximum transfer rate: digital audio modes: coax input level range: co...
20 hds4.1 component video switch 2 hds4.1 component video switch contact information instructions for returning items please retain the dated sales receipt as evidence of the date of purchase. You will need it for any warranty ser vice. If you bought the product through a dealer, installer, or resel...
Z e k t o r z e k t o r 26 danielson ct suite 40 poway, ca 2064 •4•20 www.Zektor.Com.
