Zektor 2cat™ z57bd2c hdmi™ 1.3 over cat5 extender with bi-directional ir pass-through user manual assembled in the usa designed by you. Built by us. ™.
Safety and notice the zektor 2cat™ z57bd2c hdmi™ 1.3c over cat5e/6 extender with bi-directional ir pass-through has been tested for conformance to safety regulations and requirements, and has been certified for international use. However, like all electronic equipments, the z57bd2c should be used wi...
Introduction the zektor 2cat™ z57bd2c hdmi™ 1.3c over cat5e/6 extender with bi-directional ir pass-through boosts up your hdmi transmission distance up to 60m (200ft) in hdtv 720p / 1080i format. With two low cost cat-5/5e/6 cables, users can readily extend hdtv sources from dvd players, blu-ray dis...
Specifications & package contents model name z57bd2c technical z57bd2c [tx] z57bd2c [rx ] role of usage transmitter [tx] receiver [rx ] hdmi compliance hdmi 1.3c hdcp compliance yes video bandwidth single-link 225mhz [6.75gbps] video support 480i / 480p / 720p / 1080i / 1080p60 hdmi over utp transmi...
Panel descriptions front panel — transmitting unit z57bd2c [tx] 1. Ir receiver: infrared 3.5mm socket for plugging in the extension cable of ir receiver. 2. Ir blaster: infrared 3.5mm socket for plugging in the extension cable of ir blaster 3. Hdmi in: connect to a hdm™i source with a hdm™i male-mal...
Front panel — receiving unit z57bd2c [rx ] 6. Ir receiver: infrared 3.5mm socket for plugging in the extension cable of ir receiver. 7. Ir blaster: infrared 3.5mm socket for plugging in the extension cable of ir blaster 8. Hdmi out: connect to a hdmi™ display with a hdmi™ male-male cable here. Rear ...
Pin definition hdmi™ pin 1 tmds data2+ pin 8 tmds data0 shield pin 15 scl pin 2 tmds data2 shield pin 9 tmds data0– pin 16 sda pin 3 tmds data2– pin 10 tmds clock+ pin 17 ddc/cec ground pin 4 tmds data1+ pin 11 tmds clock shield pin 18 +5 v power pin 5 tmds data1 shield pin 12 tmds clock– pin 19 hot...
Ir pass-through ir blaster ir receiver ir sockets ir blaster: plug in the ir blaster here to emit all ir command signals received from the ir receiver to control the hdmi source devices. Ir receiver: plug in the ir receiver here to receive all ir command signals from the ir remote controls of the hd...
Hardware installation !! Make sure you connect the ir connections correctly !! 1. Connect your hdm™i or dvi source (such as a blu-ray disc player) to the transmitting unit z57bd2c [tx]. 2. Connect the ir blaster and receiver to the transmitting unit z57bd2c [tx], and typically make the ir blaster di...
Notice 1. If the dvi or hdmi™ device requires the edid information, please use edid reader/writer to retrieve and provide edid information of the dvi or hdmi™ display. 2. All hdm™i over cat5 transmission distances are measured using belden 1583a cat5e 125mhz utp cable and astrodesign video signal ge...
Limited warranty zektor incorporated warrants the z57bd2c hdmi 1.3c over cat5e/6 extender with bi-directional ir pass-through to be free from defects in the material and workmanship for 1 year from the date of purchase from zektor incorporated or an authorized dealer. Should this product fail to be ...
