Summary of P30
Page 1
Zelher ® p30 user guide.
Page 2: Zelher P30
2 zelher p30 zelher p30 thank you for choosing the zelher p30 bluetooth headset, please examine the contents of the package to ensure that you have received all items, please read the entire full user guide before using the headset package contents • p30 bluetooth headset • ac charger • car charger ...
Page 3: Zelher P30
3 zelher p30 user guide for p30 key specifications • bluetooth v3.0 • 24 hours: talk time • 750 hours: standby time • enhanced battery saver (ebs) extending battery live up to 8 months • working range: 32ft • multipoint support: (pair and keeps connections with 2 bluetooth devices) • balanced and li...
Page 4: Zelher P30
4 zelher p30 1 volume up volume down 2 multifunction button 3 indicator led 4 usb charge slot 2 3 4 1 about your zelher p30
Page 5: Zelher P30
5 zelher p30 getting started • it is important to fully charge the headset, before starting the pairing process before initial use. • recommended initial charge time is 3-5 hours. • do not use the headset while charging. Note: • if you do not use your headset for a long period of time, it is recomme...
Page 6: Zelher P30
6 zelher p30 charging the headset to charge the unit: 1. Connect the large end of the usb cable into charger port. 2. Connect the small end of the usb cable into headset charging port. 3. Plug the charger into a proper outlet. 4. While charging, the indicator light on headset will turn red, when cha...
Page 7: Zelher P30
7 zelher p30 turning on: press and hold the multi-function button (mfb) for 3-5 seconds, the blue light indicator will flash 3 times, and you will hear a voice prompt saying “hello”. Turning off: press and hold the mfb for 3-5 seconds; the red light indicator will flash 3 times, and you will hear a ...
Page 8: Zelher P30
8 zelher p30 seconds, until the led light alternates between red and blue, you will hear a voice prompt saying “pairing” indicating that it is in pairing mode. 2. Activate the bluetooth search feature on your phone; refer to your phone’s manual for further instructions. 3. Select the p30 from the li...
Page 9: Zelher P30
9 zelher p30 you to connect to the headset enter “connect” or “yes”. 6. When connected you will hear a voice prompt saying “your device is connected” and the led will flash blue indicating that your bluetooth headset is connected to your phone. Pairing a 2nd device: 1. Pair the first phone following...
Page 10: Zelher P30
10 zelher p30 3. Pair the second phone using the steps above. 4. Turn off the headset, and once again turn on the first phone’s bluetooth wireless technology functionality. 5. Once again turn on the headset, and it will reconnect to both devices automatically. General functions: turning on: press an...
Page 11: Zelher P30
11 zelher p30 paired. Ones connected, you will hear a voice prompt saying “your device is connected”, and the blue light will blink once every 10 seconds. Turning off: press and hold the mfb for 3-5 seconds; the red light indicator will flash 3 times and you will hear a voice prompt saying “good bye...
Page 12: Zelher P30
12 zelher p30 battery saver (ebs) mode will automatically turn on. Adjust the volume: press volume + or – while on a call or streaming audio. Incoming call / ending a call: simply press the mfb once. Reject a call: press and hold mfb for 3 seconds. Redial: press the mfb twice..
Page 13: Zelher P30
13 zelher p30 voice dialing: press the mfb for 2 seconds. Voice dial feature will use the last paired device, for example if you pair device a and device b the voice dial will jump to device b mute on/off: press and hold volume (-) for 2-3 seconds. You will hear a double beep every 15 sec. While you...
Page 14: Zelher P30
14 zelher p30 adjusted according to your preference and comfortably. To minimize tightness from headband use the headset extenders. Low battery warning: when battery will reach to only 10% of power, the indicator light will begin to blink red and you will hear a voice prompt saying “low battery” eve...
Page 15: Zelher P30
15 zelher p30 to blink twice every 5-6 seconds for approximately 10 minutes, signaling that device will automatically turn off after 10 minutes of not getting any paired bluetooth connection. Keep your battery alive: • for ideal charge capacity and extended battery life, do not overcharge your bluet...
Page 16: Zelher P30
16 zelher p30 getting out of 32 feet distance: when your bluetooth headset gets out of the 32 feet distance from your other bluetooth device, you will hear a double beep every 10 seconds signaling that you are out of the 32 ft. Range, after 10 minutes of being out of range, your device will automati...
Page 17: Zelher P30
17 zelher p30 • use clean, soft, static free cloth to clean headset surfaces. • do not allow children to play or use headset. • do not store headset or charger in extreme environments..
Page 18: Zelher P30
18 zelher p30 fifth avenue accessories corp. Limited warranty all zelher bluetooth headsets carry a one year limited warranty, from date of purchase. Fifth avenue accessories corp . Warrants this headset will be free from defects in materials and workmanship for a period of one year from the date of...
Page 19: Zelher P30
19 zelher p30 to obtain warranty service, please contact us at warranty@zelher.Com or by calling 866.783.4546. The following information must be presented to obtain warranty service, (1) proof of purchase, which clearly indicates the name of the dealer, the product type, the date of purchase, name a...
Page 20: Zelher P30
20 zelher p30 fifth avenue accessories corp. P o box 1002, harriman, ny 10926 p. 866.783.4546 www.Zelher.Com info@zelher.Com.