ZEN M42 User Manual - page 3
2. Getting Started
Battery Install Notice
Before you install or change battery, please ensure you already turn off the phone.
Install or change SIM card Notice
1. Before you change SIM card, please make sure you already turn off the phone and dispose battery. 2.
Insert the SIM card and make the golden contact area face down and the nick face out.
Charge the battery
1. Before charging the battery, please make sure that the battery is installed properly in the phone.
2. Connect the charger lead to the phone socket, and then connect the charger to the AC socket.
3. If the phone is on when it's charging, charging display will be on the screen. If the phone is off when it's charging, user can use
it while charging. When the battery is fully charged, the charging indicator on the screen is full and stops twinkling. The first
time in use, please completely discharge and then completely charge the battery then use the phone again. The second time in
use, you also need to completely charge the battery after it completely discharged, three time like this, your battery can achieve
the full performance
4. Long period unused or some other reasons may cause low battery pressure, so at the beginning of charging the screen is black
and it may take a while before the charging indicator appears.
Warning: When charging, in order to avoid serious damage to phone circuitry, do not remove or dispose the battery.
1. Speaker
2. Screen
3. Navigation key
4. Audio/Ok key
5. Menu Left
6. Menu Right
7. Call key
8. End key
9. Number (0-9) key
13. Microphone
14. Earphone interface
15.Camera
16. Loud Speaker
10. * key
11. # key
12. USB interface
3. Calls
03
04
3.1 Key Explanation
In front of M42 mobile hone