ZEN S1 User Manual - page 4
4
4
1.
Before charging, please confirm the battery is properly installed into the phone.
2.
Insert the charger port into the jack and then connect the charger with the AC power.
3.
If the phone is off during charging, the screen displays the charging animation. If the phone is in the
ON state, the user can use the phone during charging. When the charging is completed, the
charging animation on the screen will stop at the full state. Please charge the phone to completely
full state for use when the power is thoroughly used up for the first time; same for second time,
namely charge the phone for the power being fully used up. After three times of such circulation, the
battery is easy to reach the optimal state.
4.
If the battery power is too low due to long-term unused or other reasons, the phone may be with a
blank screen at the beginning. You may require a few minutes for the display of charging animation.
Warning: please do not move or remove the battery during charging to avoid serious damage of the
phone.
3 Call functions
Keypad lock
Lock:
Press left soft key and ‘*’
Unlock:
Press left soft key and ‘*’
Make a call
1.
Method 1: In standby mode, Dial phone number (to dial a fixed number, add the area code), and
then press Dial key and choose SIM1 or SIM2 to make a call.
2.
Method 2: Enter into call log, select a number from the recent call log, and then press Dial key to
make a call.
3.
Method 3: Enter into the phonebook, select a contact saved, and then press Dial key to make a call.
Answer a call
Press Dial key to answer an incoming call. During a call, press
operations. To end a call, press Hang-up key.