ZENEC Z-E2014M User Manual - page 28
54
55
Z-E2014M
GLOSSARY
PARROT BLUETOOTH-TECHNOLOGY
The device deploys a Bluetooth module
from the market leader Parrot. The inte-
grated voice guidance and in particular
the DSP based echo and noise cancelling
provide most convenient hands-free call-
ing with highest speech intelligibility.
A2DP + AVRCP 1.3
A2DP
+AVRCP 1.3
The unit supports A2DP audio streaming
and allows stereo audio playback over
Bluetooth. The protocol supports AVRCP
1.3, i.e the functions play, stop and track
skip forward / backward.
A2DP + AVRCP 1.4
A2DP
+AVRCP 1.4
The unit supports A2DP audio streaming
and allows stereo audio playback over
Bluetooth. The protocol supports AVRCP
1.4, i.e the functions play, stop, track skip
forward / backward as well as title / art-
ist info.
BT VOICE RECOGNITION + COMMAND
BT VOICE
RECOGNITION
+ COMMAND
Voice Recognition / voice Command is a
TTS-based user-independent voice rec-
ognition to control call features* in the
Bluetooth menu, e.g. dialing of phonebook
contacts via voice command. Voice com-
mands are available for eight different
languages (DE, UK, FR, IT, ES, NL, TR,
RU). *Coupled phone must allow access
of phonebook contact data.
MADE FOR iPOD/iPHONE
You can connect an iPod/iPhone to the
device. The playback of the iPod/iPhone
can be directly controlled through the
touchscreen of the device (optional inter-
face cable required).
24 BIT D/A CONVERTER
Device features 24 Bit Digital-to-Analog-
Converter for best signal noise ratio and
high resolution playback of digital audio
fi les.
DSP HPF/LPF CROSSOVER
DSP
HPF/LPF
CROSSOVER
The device features an internal DSP with
active crossover functions, processing
both the pre-amp line-level signals and
the speaker outputs (internal amplifi er),
with selectable high-pass and low-pass
frequencies and 12dB/oct. crossover
slopes. This function provides for best
integration of active subwoofers in both
passive or active system confi gurations.
LINE-OUT
Describes the number of pre-amplifi er
outputs and the maximum output voltage.
LINE-OUT
Describes the number of pre-amplifi er
outputs and the maximum output voltage.
12 V PHANTOM POWER SUPPLY
Device features switchable built-in 12 V
antenna phantom power supply for active
antenna systems.
MULTICOLOR
The key illumination color of the device
can be chosen from a set of preselected
colors.
DAY/NIGHT MODE HMI
The unit features a built in light sensor
with ambient light sensor logic control and
day / night switching of the contrast op-
timized HMIs, respectively. This provides
maximum contrast for daylight conditions
and does reduce glare at night.
DVB-T READY
The device can be combined with a sepa-
rately available ZENEC DVB-T tuner, fea-
turing full touchscreen compatibility.
DAB+ READY
Device is touchscreen compatible with
ZENEC DAB+ tuner model(s).
SECURITY CODE
The device features a software con-
trolled security code, to prevent hardware
against thieves.
FULL EUROPE
The map data covers all European coun-
tries, including Switzerland.
NAV SPLITSCREEN
The device allows navigation map pic-
ture-in-picture overlay mode on the TFT
LCD screen for all audio sources, includ-
ing the Bluetooth hands-free mode.
MULTISENSOR DEAD RECKONING
MULTISENSOR
DEAD
RECKONING
Devices with dead reckoning process
gyro and speed pulse sensor data.
By interpolation of velocity and direction,
accurate dynamic positioning is ensured
even in areas where GPS satellite signal
is unavailable (eg, parking garages, tun-
nels, cities with skyscrapers).
TMC - TMC PRO READY
The device includes a TMC receiver. The
TMC PRO function can be activated on-
line against a license fee (optional) at
www.zenec.naviextras.com.
8 GB SDHC NAV MEMORY
The device is equipped with a SD card
slot exclusively for use with the included
8 GB SD card for navigation, contained in
the set (no audio / video playback).
8 GB MICRO SDHC NAV MEMORY
The device is equipped with a micro SD
card slot exclusively for use with the in-
cluded 8 GB micro SD card for naviga-
tion, contained in the set (no audio / video
playback).
8 GB ON-BOARD NAV MEMORY
Device contains 8 GB Nand fl ash memory
for navigation software and map data on
main pc board.
STALK INTERFACE INCLUDED
Set contains a Stalk/CAN interface, to
enable data transfer and car specifi c in-
tegration of device with target vehicles
and steering wheel remote controls and/
or CAN bus.
STALK INTERFACE READY
Allows connection of a Stalk/CAN interface
to be purchased separately, that supports
vehicle specifi c functions such as CAN
turn-on/off and/or steering wheel controls.
DRIVER INFO DISPLAY INTEGRATION
Device communicates with driver info dis-
play to show radio station and track info
of A/V sources as well as navigation turn
key arrows, if applicable.
ONBOARD COMPUTER INTEGRATION
OK
20:02
ON BOARD
COMPUTER
INTEGRATION
Device taps into the Vauxhall on-board
computer, allowing to adjust date and time
settings of vehicle directly over touch-
screen.
PARKING RADAR INTEGRATION
Device integrates OE park radar systems,
showing graphical park radar HMI dynam-
ically on the screen.
OE ACTIVE SOUND SYSTEM INTEGRATION
Device connects to and is able to drive
OE installed active sound systems (i.e.
factory installed multichannel amplifi ers).
A/C INFO
The device supports the climate status
data present in the CAN net. User opera-
tion of the climate control system such
as temperature, fan speed, heated seats
controls are read and status change is
displayed on the TFT LCD screen by a
pop-up.
DVB DIGITAL VIDEO BROADCASTING
DVB is a digital video broadcasting stand-
ard, for transmission of digitally encoded
A/V content.
GLOSSARY