ZENEC Z-EACC-DAB1 Installation Manual - page 3
3
Installation:
1. Remove the A-pillar cover in your
vehicle. The cover is secured with
special clips.
A screw is usually concealed behind a
cover in the upper area of the A-pillar.
You can carefully prise the cover off
with a plastic wedge or a flat-head
screwdriver.
CAUTION
● If your vehicle is fitted with a side
airbag, you must leave the ignition
switched off for the duration of
the installation, and proceed with
extreme caution.
2. Clean the selected adhesive area on
the windscreen using the cleaning cloth
provided (No. 3).
Wait until the glass surface has dried
completely.
3. Remove the backing sheet (flag 1) from
the foil antenna (No. 1) and attach it so
it is flush with the ceramic line.
Pay close attention to the installation
position of the antenna, which is
explained at the beginning of the
manual.
1
3
2