ZENEC ZE-NC3810 - EXTENDED COMPATIBILITY INFO Manual

Publ. 11.05.2010 UM / JL

1 von 2

Limitations:

• OE voice command systems are not supported.

• Depending on vehicle configuration the screen dim function might not be supported.

• The „velocity controlled volume“ function as found on the OE radios /navigation  units is not supported..

• It is not possible to replace the FORD DVD Navigation System featuring a 17,8 cm/ 7“ touchscreen with 

the ZE-NC3810.

• The optional driver display FORD Convers+ and the FORD HMI are not supported by the ZE-NC3810.

• The physical dimensions of the OE radios have to be compatible with the dimensions                            

of the ZE-NC3810.

• The OE rear view cameras are not supported.

Compatible vehicles:

Ford model 

(inkl. all subtypes/special editions)

Year

Focus

from 2007

Mondeo

from 2007

S-Max

from 2008

ZE-NC3810  Extended compatibility info

Time settings

Make sure the original radio is set to „automatic“ instead of „manual“ in the time settings menu. If it is still set 

to „automatic“ you will not be able to set the time of the boardcomputer anymore, as it is relying on the trans-

mission of time data through the original radio. The ZE-NC3810 does not support that function. Depending on 

vehicle configuration it might not be possible to change from „automatic“ to „manual“ after radio swapping. 

You will most likely be forced to reinstall the original radio, for the sole purpose of setting the time, 

if you omit this step.