ZENEC ZE-NC4121D Mounting Instructions - page 2
MOUNTING INSTRUCTIONS HYUNDAI iX35
➜
Eine einwandfreie Funktion des ZE-NC4121D kann nur
dann gewährleistet werden, wenn Sie das im Lieferumfang
enthaltene Zubehör verwenden.
➜
Der ZE-NC4121D ist „plug-n-play“, daher ist es nicht
nötig am originalen Anschlusskabel bzw. ISO-Stecker
Veränderungen irgendwelcher Art vorzunehmen.
➜
Achten Sie bei der Installation darauf, dass die
verschiedenen Anschlusskabel und Zubehörteile nicht
durch scharfe Kanten beschädigt und die Anschlusskabel
nicht geknickt werden.
➜
Im Auslieferungszustand ist das interne Mikrofon
aktiviert. Um das externe Mikrofon zu verwenden, müssen
Sie das externe Mikrofon im Setup des Bluetooth Modus
aktivieren.
➜
Achten Sie vor der finalen Montage des
ZE-NC4121D darauf, dass alle Steckverbindungen auf der
Geräterückseite richtig verbunden und fest eingerastet
sind.
➜
Bei Fragen oder Problemen wenden Sie sich an
Ihren ZENEC-Händler, bei dem Sie das Gerät gekauft
haben. Zusätzlich finden Sie unter www.zenec.com eine
ausführliche FAQ Datenbank, wo viele der Fragen und
Probleme, welche während der Installation auftreten
könnten, entsprechend beantwortet werden.
➜
Da Updates (Software und Kartenmaterial) für
das Navigationssystem nur über den USB-Anschluss
installiert werden können und sich der USB-
Anschluss an der Rückseite des ZE-NC4121D befindet,
sollten Sie die im Lieferumfang befindliche Media-
Link Box unbedingt an einem leicht zugänglichen Ort
installieren. Die Media-Link Box verfügt über einen
entsprechenden USB Port.
Bitte Beachten/Please Note
➜
The flawless function of the ZE-NC4121D can only
be guaranteed, when the original accessories and wire
harnesses contained in the set are deployed as described in
this installation manual.
➜
The ZE-NC4121D is a plug and play product.
Modifications of the original wire loom or the ISO connector
of the vehicle are not required.
➜
When mounting the ZE-NC4121D always pay proper
attention not to damage any of the wires, plugs or other
parts. Avoid applying too much mechanical force especially
when pushing the unit back into the slot.
➜
Out of the box, the internal microphone is activated.
If you want to use the external microphone, activate the
external microphone in the Bluetooth setup menu.
➜
Please check if all plug-and-socket connections on the
rear of the ZE-NC4121D are properly seated before fixing the
device in place.
➜
Please contact your authorized ZENEC dealer or the
distributor of the country, where you have purchased your
E>GO unit, if you have any technical problems or further
questions.
In addition, you can look up a detailed FAQ data base on
www.zenec.com, where most of the questions revolving
around the connectivity or the installation of a given E>GO
model are explained in detail.
➜
Any update of the main unit software or the
navigation system (software and map data) requires
the USB port of the media-link box to be present and
accessible. For this purpose, the installation of the
media-link box is mandatory. The media-link box is
contained in the ZE-NC4121D set content – just make
sure you find a good and suitable mounting location
that is easy to access (i.e. glove compartment, arm rest
box etc.).
Das Hauptanschlusskabel wird wie im
Anschlussdiagramm abgebildet angeschlossen.
BiTTE BEAChTEN
Anschluss Parking-Kabel
Das Kabel „Parking“ muss an einen Hand-
bremsenkontakt angeschlossen werden, so dass
dieses gegen Masse (GND) geschaltet ist, wenn
die Handbremse angezogen ist.
Anschluss Reverse-Kabel
Das Kabel „Reverse“ muss an einen Rücklicht-
kontakt angeschlossen werden, so dass
dieses gegen 12 V geschaltet ist, wenn der
Rückwärtsgang eingelegt wird.
Connect the main wire harness exactly as
shown in the electrical connections overview.
PLEASE NOTE
Connection of Parking Cable
Do connect the “Parking“ cable to a terminal of
your handbrake which shunts to ground (GND)
when the handbrake is engaged.
Connection of Reverse Cable
Do connect the “Reverse“cable to a terminal of
your tail light that supplies 12 V voltage when
the reverse gear is engaged.
Übersicht Anschlüsse:
Connections Overview: