ZENEC ZEM-1040RM Instruction Manual - page 6
6
CONTROLS & KEYS OF THE REMOTE CONTROL
1) TV/CATV e No function
2) TV/AV e No function
3) Mute e Key to mute the headphone
output
4) Power e Key to turn on, or switch off
the monitor
5) Numeric keys e No function
6) FM/AM e No function
7) Setup e No function
8) Func e To select the picture
adjustment parameters
9) Mode e To select input Video1 or
Video2
10) UP+ / DN- e Keys to de- or increase
picture adjustment parameters
11) CH ▼/▲ e No function
12) Vol ▼/▲ e Keys to increase or
decrease the headphone volume level
TECHNICAL SPECS
Power supply voltage:
DC 12V (9-16V)
Max. current consumption:
0.8A
Max. power consumption:
24W
Operating temperature range: 0° to +85° Celsius
Video input signal:
Composite 1.0V p-p, 75 ohms with neg. sync
DIMENSIONS
Monitor:
width (only front with TFT panel) = 259mm,
height = 215mm, depth = 20mm
AV interface blackbox
width = 62mm,
(without wire harness):
height = 28mm, depth = 45mm
Total weight of monitor:
1430g
ZEM-W1040RM Manual 12.09.2003 9:05 Uhr Seite 6