ZENEC ZEM-561USM Instruction Manual - page 9
9
OPERATION:
Power button:
Press POWER button to switch on / off the unit.
Menu – button:
You can operate the unit with the remote control or the keys located on the housing. Push the
Menu button for the On–Screen Menu (OSD) to change the following adjustments:
■
Brightness: To adjust the brightness of the picture, adjustable from -16 to +16
■
Color: To adjust the color saturation of the picture, adjustable from -16 to +16
■
Contrast: To adjust the contrast setting of the picture, adjustable from -16 to +16
■
Tint: To adjust the tint of the color, adjustable from -16 to +16
You can adjust the tint of the color only in NTSC mode.
■
System: The monitor is compatible with PAL and NTSC video streams.
Select the video system according to the actual monitor type in use.
■
Rev: You can invert the picture or turn it upside down
(Norm - REV1 - REV 2 - REV 3)
You can choose the different menu items with the VOL+ and VOL- buttons and change the
adjusted setting with the CH+ und CH- buttons.
DIMENSIONS:
Monitor (HxWxD):
122 x 148 x 20 mm
Monitor mounted in headrest bezel (HxWxD):
134 x 158 x 22 mm
Necessary cut out for headrest bezel (HxW):
135 x 159 mm
ZEM-561USM Manual D+Enew.indd 9
01.09.2004 12:25:41 Uhr