ZENEC ZEM-W700DMM Instruction Manual - page 32
32
6. LEFT / RIGHT
■
When you are in the Setup/Menu/P.
Menu function, to reduce/increase the
system value or choose in the
left/right direction.
■
Using the left/right keys allows you to
select sub-menus.
7. SCAN/RDM
■
DVD/CD changer mode
Press this button to switch scan on/off,
Press and hold to switch random on/
off.
■
Radio mode
Press this button to scan any available
frequency and play each one for 5
seconds.
*During playback, pressing the key
SCAN/RDM will invoke station search,
which will stop when you press this
button again; or if you press any other
button, this function will stop and
the tuner reverts back to the station
frequency at beginning of scan.
8. PREVIOUS/NEXT
■
DVD/CD changer mode
Press this button to select the previous
chapter/track or the next chapter/track;
Press and hold this button to fast
forward or fast reverse.
■
TV/Radio mode
Press this button to search or fine tune
the station frequency in steps; press
and hold this button to automatically
search the previous station or the next
station.
9. PLAY/PAUSE
■
DVD/CD changer mode
Press this key to pause the playback or
resume the playback.
10. P.MODE
■
To change the aspect format of the
TFT-LCD Display to either Full or
Normal.
11. P.MENU
■
TFT-LCD display
Press P.MENU to gain access over
picture adjustment settings as follows:
Brightness, Color, Contrast, Tint (only
for NTSC), and select PAL/NTSC/
AUTO.
■
P.MENU allows to set all functions
identical with the SEL key.
■
Choosing the menu RESET will set all
adjustments back to the original factory
default value.
■
Setup: Auto open/close LCD panel
When set to Auto, the LCD panel
will be housed in 20s without a video
signal. As soon as input video signal
is coming in, the LCD panel will open
automatically.
12. H.ANGLE
■
To adjust the angle in the horizontal
position while TFT-LCD panel is open.
■
When the menu in the LCD display is
shown, you can use the H.ANGLE key
to scroll down.
13. P.POWER
■
To open/close the TFT-LCD display
panel.
14. SOURCE
■
To select the mode in the following
order: Radio ➞ TV ➞ CDC ➞ AUX IN ➞
RGB IN ➞ Video IN ➞ Radio
■
The original mode is Radio mode.
■
When connected to a SANYO DVD/CD
changer, the CDC mode is available.
■
Press and hold this button to display
the current time.
15. MUTE
■
Press the MUTE key to turn the audio
output on or off.
ZEM-W700DMM Manual E.indd 32
17.11.2004 16:14:35 Uhr