Instruction manual angle grinder ag-180/1800
3 general safety precautions warning! When using electric tools, basic safety precautions should always be followed to reduce the risk of fire, electric shock and personal injury, including the following. Read all these instructions before operating this product and save these instructions. For safe...
4 17. Avoid unintentional starting. Do not carry a plugged in tool with a finger on the switch. Ensure switch is off when plugging in. 18. Use outdoor extension leads. When tool is used outdoors, use only extension cords intended for outdoor use. 19. Stay alert. Watch what you are doing. Use common ...
5 description 1. Grinding wheel 2. Wheel cover 3. Side handle 4. On\off switch 5. Lock button technical specifications model ag-180/1800 rated power 1800 w rated voltage 220-240 v rated frequency 50-60 hz maximum speed 8000 rpm wheel diameter 180 mm standard accessories wrench 1 side handle 1 depres...
6 1. Power source. Ensure that the power source to be utilized conforms to the power source requirements specified on the product nameplate. 2. Power switch. Ensure that the power switch is in the off position. If the plug is connected to a recep- tacle while the switch is in the on position, the po...
7 grind only with the wheel’s edge by lifting the grinder 15°-30°. Do not use the en- tire surface of the depressed center wheel. Use only the edge of the depressed center wheel. 3.Move the grinder in proper direction when using a new depressed center wheel, grind transverse to the surface being gro...
8 maintenance and inspection 1. Inspecting the depressed center wheel. Confirm that there is no crack or any damage to the depressed center wheel. 2. Inspecting the screws regularly inspect all screws and ensure that they are fully tightened. Should any of the screws be loosened, retighten them imme...
9 performed only in authorized service centers zenit. While use or maintenance of pow- er tools follow all safety rules and standards. Note zenit power tools are constantly being improved and modified to incorporate the latest technological advancements. Accordingly, some parts may be changed withou...
Demix llc head office: 14, shevchenko str., 3rd floor dnepropetrovsk, ukraine, 49044 tel./fax: +38 056 375-43-16 http://www.En.Zenit-profi.Com.
