Zenith C13A03D Instruction Manual

Manual is about: Zenith C13A03D: Instruction Manual

Summary of C13A03D

  • Page 1

    Record your model number the model and serial number of the destination tm ii pc/tv are located on the back of the tv cabinet. For your future convenience, we suggest that you record these numbers here: model no.____________________________________ serial no.____________________________________ warn...

  • Page 2

    P a g e 3 206-3489-o 3-wire grnd 1. Read instructions all the safety and operating instructions should be read before the product is operated. 2. Follow instructions all operating and use instructions should be followed. 3. Retain instructions the safety and operating instructions should be retained...

  • Page 3

    (continued from previous page) 14. Outdoor antenna grounding if an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the national electrical ...

  • Page 4

    206-3643 p a g e 5 table of contents this operating and installation guide is divided into three sections: 6 thru 13, computer section - setting up the destination ii pc/tv to be used as a computer monitor. 14 thru 43, tv section - setting up the tv’s features. 44 thru 46, installer section - a spec...

  • Page 5

    206-3602 p a g e 6 connect your computer to the tv using the cable provided in the accessory packet supplied with the tv, follow the hookup instructions on pages 7 and 8. Pc you can make a direct hookup to the tv’s front or rear computer connectors without using any adapters. Mac macintosh configura...

  • Page 6

    206-3643 p a g e 7 make the basic connections as shown. Plug in your tv. Do not plug it into a switched outlet. Your destination ii pc/tv is designed to operate on standard current, 120-volt 60 hertz ac. Do not attempt to operate it on dc current. Using the remote, choose the computer as the viewing...

  • Page 7

    206-3643 p a g e 8 an accessory packet is included with all models. A 15-ft. Cable with a “video mirror” is featured for providing a computer image to two monitors—an additional monitor and your destination ii pc/tv. Computer monitor video cable from monitor actual appearance of components may vary ...

  • Page 8

    206-3643 p a g e 9 computer, pc/tv loop-out setups video cable from monitor actual appearance of components may vary cable for "video mirror" back of computer master tv's computer output to other tvs in the "daisy chain" computer monitor computer abc abc abc abc computer input to master tv abc video...

  • Page 9

    P a g e 1 0 206-3643 pc: windows environment setting your computer for optimum picture output in the windows operating system environment the following is a step-by-step procedure for setting your computer’s picture output to optimum display quality. 1. Hook up your computer to the destination ii pc...

  • Page 10

    P a g e 1 1 206-3643 troubleshooting: windows symptoms possible cause(s) possible solution(s) computer image poor or no computer picture. • poor connections. -check all cable connections. • card not fully inserted. -be sure green light appears on video out. • tv/computer not turned on. -turn tv/comp...

  • Page 11

    P a g e 1 2 206-3643 remote key command functions remote key normal mode menu mode zoom mode 1* enter zoom mode n/a †† increase zoom or cancel zoom mode 2 n/a n/a pan up 3 compress on/off n/a compress on/off 4 n/a menu adjust down pan left 5 enter menu mode cancel menu model enter menu mode 6 n/a me...

  • Page 12

    P a g e 1 3 206-3643 menu manual set: vga bot/4: 157 4 6 adjust 8 menu manual set: vga store 0 6 adjust 8 menu advanced: sw 18 hw 6, 5 adjust 8 menu advanced: total lines 628 adjust 8 menu advanced: vert. Freq 60 adjust 8 5 5 5 5 5 menu adjust: advanced . . . 6 adjust 8 5 5 pressing this key will ex...

  • Page 13

    P a g e 1 4 206-3643 if you are using an antenna and no other equipment, go to . . . . . . . . . . . . . . . . . . Page 15 if you have cable and no other equipment, go to . . . . . . . . . . . . . . . . . . . . . . . . . Page 16 if you are using an antenna and have a vcr, go to . . . . . . . . . . ....

  • Page 14

    206-3643 p a g e 1 5 mini glossary 75 ohm rf cable the wire that comes from an off-air antenna or cable service provider. Each end looks like a hex shaped nut with a wire sticking through the middle, and it screws onto the threaded jack on the back of your tv. A small device that connects a two-wire...

  • Page 15

    P a g e 1 6 206-3643 hook up your cable (catv) to the tv if you’re using a cable box, leave the tv tuned to channel 3 or 4 and use your cable box to change channels. If you’re using a cable box, auto program might only find the channel your cable service is on (usually channel 3 or 4). Don’t worry, ...

  • Page 16

    P a g e 1 7 206-3643 hook up antenna and vcr to the tv connect an off-air antenna and vcr to the destination ii pc/tv no a/v cables are included with the gateway destination ii pc/tv. Without a/v cables, most vcrs will not play videocassettes in stereo sound. Video antenna cable r- audio- l s-video ...

  • Page 17

    P a g e 1 8 206-3643 hook up cable service (catv) and vcr connect a vcr and cable service to the destination ii pc/tv leave the vcr and the television tuned to channel three and use the cable box to change channels. No a/v cables are included with your destination ii pc/tv. Without a/v cables, most ...

  • Page 18

    P a g e 1 9 206-3643 video antenna cable r- audio- l s-video in computer audio r l aux in m.P.I. Tv back r- audio- l r- audio- l s-video out audio out video out c o m p u t e r i n s-video cable not included with tv audio out s-video out 3 4 vcr back vcr back av panel output switch r l connect audio...

  • Page 19

    P a g e 2 0 206-3643 send the sound from the destination ii pc/tv to an external amplifier audio output: use the left and right audio out jacks to connect an external amplifier and speakers. (refer to the audio menu on page 32 for instructions on how to turn the tv’s internal speakers off and on.) c...

  • Page 20: 3/5

    P a g e 2 1 206-3602 auto program (channel search) use auto program to specify antenna or cable service incoming signal source and automatically store all of the channels found by the channel search with the remote control in hand, press the power key to turn on the destination ii pc/tv. Press menu ...

  • Page 21

    P a g e 2 2 206-3602 front panel controls/source inputs adjust select menu l audio r video in computer in captions volume channel power 1 3 to access the menus press the menu button on the control panel. Cycle through the vari- ous menus by pushing the button repeatedly. Press the select button repe...

  • Page 22

    P a g e 2 3 206-3643 prg (program) programs remote to operate other products. Flashbk (flashback) returns to the last channel viewed. Power turns tv on or off . Cable/vcr/aux/tv (mode keys) switches remote mode to control other devices. Aux is for optional devices. Channel (up/down) chooses next hig...

  • Page 23

    P a g e 2 4 206-3602 on-screen menus/displays overview on-screen menus setup menu adjusts the basic characteristics of the tv auto program 21 automatically finds and stores active channels to scroll through using channel up/down. Add/del/blnk 25 manually picks and chooses which active channels will ...

  • Page 24

    P a g e 2 5 206-3492-o prg power cable vcr aux tv surf enter flashbk mute channel channel volume volume 1 2 3 4 5 6 7 0 8 9 menu rewind ffwd record quit a b c cc tv/vcr source pause timer play stop fine-tune the channel selection list setting add/delete/blank press menu on the remote repeatedly unti...

  • Page 25

    P a g e 2 6 206-3602 prg power cable vcr aux tv surf enter flashbk mute channel channel volume volume 1 2 3 4 5 6 7 0 8 9 menu rewind ffwd record quit a b c cc tv/vcr source pause timer play stop using preset channel labels customizing channel names with the preset channel labels (or, see the next p...

  • Page 26: 4/a

    P a g e 2 7 206-3602 creating your own channel labels prg power cable vcr aux tv surf enter flashbk mute channel channel volume volume 1 2 3 4 5 6 7 0 8 9 menu rewind ffwd record quit a b c cc tv/vcr source pause timer play stop customize channel names by using your own custom channel labels to prog...

  • Page 27

    206-3602 p a g e 2 8 prg power cable vcr aux tv surf enter flashbk mute channel channel volume volume 1 2 3 4 5 6 7 0 8 9 menu rewind ffwd record quit a b c cc tv/vcr source pause timer play stop the sleep timer may be instantly set by pressing the timer key repeatedly. When you have made your selec...

  • Page 28

    P a g e 2 9 206-3602 captions (caption/text setup) caption/text is a feature which allows the tv to receive the closed caption and/or text options if made available by the broadcaster. Availability and functionality of caption/text features is determined only by each broadcaster and may not be avail...

  • Page 29

    P a g e 3 0 206-3602 prg power cable vcr aux tv surf enter flashbk mute channel channel volume volume 1 2 3 4 5 6 7 0 8 9 menu rewind ffwd record quit a b c cc tv/vcr source pause timer play stop use the alarm menu to set a time for the tv to automatically turn itself on with the alarm menu option h...

  • Page 30

    P a g e 3 1 206-3602 prg power cable vcr aux tv surf enter flashbk mute channel channel volume volume 1 2 3 4 5 6 7 0 8 9 menu rewind ffwd record quit a b c cc tv/vcr source pause timer play stop language auto program add/del/blnk ch. Labels clock set captions alarm menu language english 2 1 4 choos...

  • Page 31: 2/4

    206-3602 p a g e 3 2 mini glossary stereo sound stereo (stereophonic) sound refers to audio that’s divided into right and left sides. Mono sound mono (monaural) sound is one channel of sound. On more than one speaker, all the speakers play the same audio. Custom your own audio menu settings. Preset ...

  • Page 32: 3/6

    P a g e 3 3 206-3602 prg power cable vcr aux tv surf enter flashbk mute channel channel volume volume 1 2 3 4 5 6 7 0 8 9 menu rewind ffwd record quit a b c cc tv/vcr source pause timer play stop video menu/computer video menu note: for computer video menu, connect and select a computer source. Pres...

  • Page 33

    P a g e 3 4 206-3602 parental control menu mini glossary motion picture association of america (mpaa) rating system g general audiences content not offensive to most viewers. Pg parental guidance content is such that parents may not want their children to view the program. Suggested pg-13 parental g...

  • Page 34: 2/3

    P a g e 3 5 206-3643 prg power cable vcr aux tv surf enter flashbk mute channel channel volume volume 1 2 3 4 5 6 7 0 8 9 menu record quit a b c cc tv/vcr source pause timer parental control menu mini glossary tv parental guideline rating system tv-g general audience considered suitable for all audi...

  • Page 35

    P a g e 3 6 206-3492-o other menus & on-screen displays ch 9 3:12 pm stereo channel/time/audio display press enter. Shows currently selected channel or source, current time if the clock has been set, and incoming audio signal. Sleep timer menu press timer. Shows remaining time before tv shutoff. Pre...

  • Page 36

    P a g e 3 7 206-3643 prg power cable vcr aux tv surf enter flashbk mute channel channel volume volume 1 2 3 4 5 6 7 0 8 9 menu rewind ffwd record quit a b c cc tv/vcr source pause timer play stop programming your destination ii pc/tv remote will allow you to use one remote to work up to 7 different ...

  • Page 37: 2/3

    P a g e 3 8 206-3643 prg power cable vcr aux tv surf enter flashbk mute channel channel volume volume 1 2 3 4 5 6 7 0 8 9 menu rewind ffwd record quit a b c cc tv/vcr source pause timer play stop amplifier volume override 5 2/3 indicator light mini glossary amplifier an electronic device that amplif...

  • Page 38

    P a g e 3 9 206-3643 prg power cable vcr aux tv surf enter flashbk mute channel channel volume volume 1 2 3 4 5 6 7 0 8 9 menu rewind ffwd record quit a b c cc tv/vcr source pause timer play stop aux+1, aux+2, aux+3 1 2 3 4 5 6 5 6 2 4 3 programming your destination ii pc/tv remote will allow you to...

  • Page 39: 5/7

    P a g e 4 0 206-3643 prg power cable vcr aux tv surf enter flashbk mute channel channel volume volume 1 2 3 4 5 6 7 0 8 9 menu rewind ffwd record quit a b c cc tv/vcr source pause timer play stop 5/7 3 6 2 4 indicator light remote control auto-find 1 2 3 4 5 6 7 you can quickly get out of auto find ...

  • Page 40

    P a g e 4 1 206-3643 brand programming codes tvs vcrs find the codes you need to program your remote. On this page: tvs, vcrs, and cable boxes admiral . . . . . . . 116 121 130 133 adventura tv/vcr 154 akai . . . . . . . . . . 104 amark . . . . . . . . 103 146 aoc . . . . . . . . . . 104 bell & howe...

  • Page 41

    P a g e 4 2 206-3643 brand programming codes video disc players cable boxes allegro . . . . . . . . 358 362 allegro a/b switch 361 gemini . . . . . . . . 305 331 338 general electric. . . 367 general instrument 304 305 306 307 308 309 310 318 hamlin . . . . . . . . 302 303 345 365 366 jerrold . . . ...

  • Page 42

    P a g e 4 3 206-3643 a list of key functions by mode for the remote control remote operating mode key functions some of the functions shown above may not be available on your tv (such as pip). Tv mode vcr mode cable mode aux mode key name zenith code 101 zenith code 201 zenith code 353 zenith code 4...

  • Page 43

    P a g e 4 4 206-3492-o item description range fact. Set recommended setting 00 fact menu 0 - 1 0 leave default set 0 01 preset px 0 - 1 1 02 preset ax 0 - 1 1 03 power manage 0 - 7 0 04 vert pos 0 - 30 15 05 horz pos 0 - 45 15 06 band/afc 0 - 7 0 07 min volume 0 - 63 0 08 max volume 0 - 63 63 09 ac ...

  • Page 44

    P a g e 4 5 206-3602 installer menus *note: installer menu items changing tv mode values installer menu options: 01 preset px (preset picture), 02 preset ax (preset audio), 04 vert pos (vertical position), and 05 horz pos (horizontal position), have separate values for tv mode and computer mode. If ...

  • Page 45

    P a g e 4 6 206-3643 continued from previous page. 11 strt channel (start channel) when active, this function allows you to determine the initial channel number when the tv is turned on. This feature is useful for an in-house information channel, since the tv would always select that channel when it...

  • Page 46

    P a g e 4 7 206-3602 troubleshooting some quick and easy tips to resolving problems symptoms cause(s) possible solution(s) page(s) power no power. • ac power cord not connected -connect power cord. Try a different outlet. 16 - 19 or outlet doesn’t work, -local power failure? No source image. • sourc...

  • Page 47

    P a g e 4 8 206-3643 troubleshooting symptoms possible cause(s) possible solution(s) see page(s) picture reception poor or no picture. • tv station problems. -try a different channel. 22/23 • video menu not adjusted properly. -check video menu option settings. 33 local interference. • check for dist...

  • Page 48

    P a g e 4 9 206-3643 routine tv cabinet and screen cleaning maintenance 1. Here’s a great way to keep the dust off the screen for a while. Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it’s almost dry, and then use it to...

  • Page 49

    P a g e 5 0 206-3492-o a list of definitions for words found in this guide 75 ohm rf cable the wire that comes from an off-air antenna or cable service provider. The end looks like a hex-shaped nut with a wire sticking through the middle. It screws onto the threaded jack on the back of the tv. 300 t...

  • Page 50

    P a g e 5 1 206-3492-o.

  • Page 51

    P a g e 5 2 206-3602.

  • Page 52

    P a g e 5 3 206-3492-o.

  • Page 53

    P a g e 5 4 206-3602.

  • Page 54

    P a g e 5 5 206-3492-o.

  • Page 55

    P a g e 5 6 206-3492-o.

  • Page 56

    P a g e 5 7 206-3492-o.

  • Page 57

    P a g e 5 8 206-3492-o.

  • Page 58

    P a g e 5 9 206-3492-o.

  • Page 59

    206-3643.