Zenith Concierge H27E35DT Installation & Operating Manual

Other manuals for Concierge H27E35DT: Installation & Operating Manual
Manual is about: Zenith H27E35DT: Operating Guide

Summary of Concierge H27E35DT

  • Page 2: Warning

    Record tv model number the model and serial number of the concierge tm tv are located on the back of the tv cabinet. For future convenience, we suggest that you record the numbers here: model no.____________________________________ serial no.____________________________________ warning: to reduce th...

  • Page 3

    P a g e 3 1. Read instructions all the safety and operating instructions should be read before the product is operated. 2. Follow instructions all operating and use instructions should be followed. 3. Retain instructions the safety and operating instructions should be retained for future reference. ...

  • Page 4

    (continued from previous page) 14. Outdoor antenna grounding if an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the national electrical ...

  • Page 5

    206-3751 p a g e 5 table of contents turn to the next page to begin the tv set up safety warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 important safety information . . . . . . . . . . . . . . . . 3 - 4 table of contents . . . . . . . . . . . . . . . . . . . . . . . . . . 5 step 1....

  • Page 6

    If you are using an antenna and no other equipment, go to . . . . . . . . . . . . . Page 7 if you have cable service and no other equipment, go to . . . . . . . . . . . . . . Page 8 if you are using an antenna and have a vcr, go to . . . . . . . . . . . . . . . . . . Page 9 if you have cable service...

  • Page 7

    Locate the antenna/cable jack on the back of the tv. Connect the antenna wire that runs from the wall directly to this jack, according to one of the diagrams to the right. Remove the back of the remote and put in two aa batteries. Plug in the tv. The tv is designed to operate on stan- dard current, ...

  • Page 8

    206-3489-o p a g e 8 hook up your cable (catv) to the tv if you’re using a cable box, leave the tv on channel 3 or 4 and use your cable box to change channels. If you’re using a cable box, auto program might only find the channel your cable service is on (usually chan- nel 3 or 4). Don’t worry, that...

  • Page 9

    Locate the antenna/cable in jack on the back of the vcr. Connect the wire that runs from the antenna, according to one of the diagrams to the right. As required, make the other connections as shown to the right. Remove the back of the remote, put in two aa bat- teries. Plug in the tv. The tv is desi...

  • Page 10

    Locate the antenna/cable in jack on the back of the vcr. Connect the wire that runs from the wall, accord- ing to one of the diagrams to the right. As required, make the other connections as shown to the right. Remove the back of the remote, put in two aa batteries. Plug in the tv. The tv is designe...

  • Page 11

    P a g e 1 1 206-3489-o external speaker hook up a/v cables not included with tv r- audio- l video in matrix out in audio in speaker back tv back panel (expanded view) tv back antenna cable m.P.I. 1 2 locate the audio in jack on the back of the speaker. Connect a standard audio cable from the matrix ...

  • Page 12: 3/5

    P a g e 1 2 206-3751 auto program (channel search) 1 2 3 4 5 6 7 timer ch preview enter 1 2 3 4 5 6 7 8 9 0 power flshbk mute vol ume channel tv/fm cc menu alarm adj adj select 3/5 auto program add/del/blnk ch. Labels clock set timer captions language to program 4/6 1 7 2 use auto program to specify...

  • Page 13

    P a g e 1 3 206-3751 front panel controls a 1 2 3 d use the front control panel to access the menus or just operate the tv note: item 10 key defeat, in the installer’s menu allows the installer to: set menu option 10, key defeat to “0” - front panel controls give access to menus. Set menu option 10,...

  • Page 14

    P a g e 1 4 206-3751 guest remote key functions timer alarm ch preview enter 1 2 3 4 5 6 7 8 9 0 power flshbk mute vol ume channel cc remote control part number sc652 124-213-02 flashbk (flashback) returns to the last channel viewed. Power turns tv on or off . Channel (up/down) scrolls through avail...

  • Page 15

    206-3751 p a g e 1 5 installer remote key functions timer ch preview enter 1 2 3 4 5 6 7 8 9 0 power flshbk mute vol ume channel tv/fm cc menu alarm adj adj select remote control part number lp702 124-213-04 flashbk (flashback) returns to the last channel viewed. Power turns tv on or off . Channel (...

  • Page 16

    P a g e 1 6 206-3751 on-screen menus overview on-screen menus setup menu adjusts the basic operational features of the tv auto program 12 automatically finds and stores active channels to scroll through using channel up/down. Add/del/blnk 17 manually picks and chooses which active channels will appe...

  • Page 17: 3/5

    P a g e 1 7 206-3751 setting add/delete/blank 1 2 3 4 5 timer ch preview enter 1 2 3 4 5 6 7 8 9 0 power flshbk mute vol ume channel tv/fm cc menu alarm adj adj select 2 ch 44 added timer 4 3/5 1 3 3 fine-tune the guest’s channel selection list press the menu key on the installer’s remote so the set...

  • Page 18

    P a g e 1 8 206-3751 setting up channel labels timer ch preview enter 1 2 3 4 5 6 7 8 9 0 power flshbk mute vol ume channel tv/fm cc menu alarm adj adj select auto program add/del/blnk ch. Labels clock set timer captions language ch 32 abc setup menu overview channel labels help the user identify th...

  • Page 19

    P a g e 1 9 206-3751 set the clock timer ch preview enter 1 2 3 4 5 6 7 8 9 0 menu alarm adj adj select 5 3 4 2 1 mini glossary time a four-digit figure broken down into hours and minutes, used to enter the current time when setting the clock or wake-up alarm. Hours first two digits that are entered...

  • Page 20

    P a g e 2 0 206-3584 on time 9:00 am off time 7:00 pm on/off timer on timer auto program add/del/blnk ch. Labels clock set timer captions language to set timer setup menu set up on/off timers note: on/off timers oper- ate independently of each other. On the optional installer’s remote, press menu re...

  • Page 21

    P a g e 2 1 206-3489-o captions (caption/text) timer ch preview enter 1 2 3 4 5 6 7 8 9 0 power flshbk mute vol ume channel tv/fm cc menu alarm adj adj select 2 1 standard closed captioning is available using the caption 1 option. Caption 1 caption 2 caption 3 caption 4 text 1 text 2 text 3 text 4 o...

  • Page 22

    P a g e 2 2 206-3489-o language auto program add/del/blnk ch. Labels clock set timer captions language english setup menu timer ch preview enter 1 2 3 4 5 6 7 8 9 0 power flshbk mute vol ume channel tv/fm cc menu alarm adj adj select 2 1 4 1 2 3 4 3 choose the language for the on-screen menus press ...

  • Page 23: 2/4

    P a g e 2 3 206-3489-o 1 2 3 4 audio menu audio pref custom timer ch preview enter 1 2 3 4 5 6 7 8 9 0 power flshbk mute vol ume channel tv/fm cc menu alarm adj adj select 2/4 1 4 3 mini glossary stereo sound stereo (stereophonic) sound refers to audio that’s divided into right and left sides. Mono ...

  • Page 24: 2/a

    P a g e 2 4 206-3240-o video menu 1 2 3 4 a timer ch preview enter 1 2 3 4 5 6 7 8 9 0 power flshbk mute vol ume channel tv/fm cc menu alarm adj adj select 2/a 1 4 3/b b press menu repeatedly until the video menu appears. Your options are: • contrast: adjusts the level of difference between white an...

  • Page 25

    Notes reset parental control block hours to zero and cancel password this provides the lodge staff and the installer a means to reset the tv to normal operation, if a guest has either forgotten the password or has left parental control block active after checking out. On the installer’s remote contr...

  • Page 26

    P a g e 2 6 206-3751 installer parental control menu after you have read the preceding page, follow instructions below to set up and activate parental control setup menu audio menu dialog language sex scenes violence f violence no rating to block general children age block unblocked content block to...

  • Page 27

    P a g e 2 7 206-3489-o other menus & on-screen displays channel preview• 5 - - - - 9 - - - - 20 - - - - 32 - - - - 44 - - - - aux - - - - cc for parental control ch to select, enter to quit volume• press the remote keys indicated below to access these menus and displays channel bank bank 3 caption 1...

  • Page 28

    P a g e 2 8 206-3489-o planning the channel banks generally, tv channels are grouped into “program pack- ages” with terms that are proposed to the end user. The user then opts for a package. Below is an example of how tv channels may be grouped. You may plan your package by using a chart like the on...

  • Page 29

    P a g e 2 9 206-3489-o b purpose channel number a 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 n k 1 a a a a a a a a a a a a a a a 2 a a a a a a a a a a a a a a a 3 a a a a a a a a a a a a a a a 4 a a a a a a a a a a a a a a a b purpose channel number a 1 2 3 4 5 6 7 8 9 10 11 1...

  • Page 30

    206-3688-0 p a g e 3 0 plan your channel banks by filling in these charts (or use photocopies) b purpose channel number a 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 n k 1 2 3 4 b purpose channel number a 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 5...

  • Page 31

    P a g e 3 1 206-3688-o installer menus installer should leave item 1 fact mode set to 0 (default). Items 25-79 are ser- vice-type adjustments and only qualified technicians having specialized test equip- ment should access them. Item description range fact. Set recommend. Setting 00 fact menu 0 - 1 ...

  • Page 32

    P a g e 3 2 206-3688-0 installer menus 00 fact menu (factory mode) used to access and customize the 00 - 24 installer’s menu settings using installer type remotes. 01 preset px (preset picture) saves your custom video settings (color, tint, contrast, and bright- ness) in nonvolatile memory (not affe...

  • Page 33

    P a g e 3 3 206-3489-o installer menus continued from previous page. The range of values is 0 - 255. Use (adjust) keys to choose num- bers that determine the start channel. 12 strt volume (start volume) when active, this function allows you to determine the initial vol- ume level setting when the tv...

  • Page 34

    P a g e 3 4 206-3489-o lt2000 quickset programmer a slow flashing green light indicates there is a problem with the communications between the tv and the programmer. In this case, check for a damaged cable, poor contacts, or other connection troubles. If the status indicator is red, the programmer b...

  • Page 35

    P a g e 3 5 206-3489-o clone selection menu choices typical edit channel labels on-screen menus clone selection menu (1) learn from tv (2) teach to tv (3) set clone clock from tv (4) set tv clock from clone (5) display tv setup (6) display clone setup (7) edit channel labels (8) send channel labels ...

  • Page 36

    P a g e 3 6 206-3489-o clone selection menu choices operation notes disconnect the clone from the tv when you are finished; auto- matically switching it off. The real-time clock continues to run when the main circuits are switched off. Reset clone after static shock after replacing exhausted batteri...

  • Page 37

    P a g e 3 7 206-3594-0 routine tv cabinet and screen cleaning maintenance 1. Here’s a great way to keep the dust off the screen for a while. Wet a soft cloth in a mixture of luke- warm water and a little fabric softener or dish washing detergent. Wring the cloth until it’s almost dry, and then use i...

  • Page 38

    P a g e 3 8 206-3489-o symptoms snowy picture and unclear sound. Multiple images or ‘ghost shadows.’ interference: sharp lines across the screen and poor sound. Normal picture but no sound. No picture and unclear sound. No picture and no sound. No color, but the sound is o.K. Picture has a big black...

  • Page 39

    P a g e 3 9 206-3489-o glossary a list of definitions for words found in this guide 75 ohm rf cable the wire that comes from an off-air antenna or cable service provider. The end looks like a hex-shaped nut with a wire sticking through the middle. It screws onto the threaded jack on the back of the ...

  • Page 40

    P a g e 4 0 206-3489-o guest remote control key functions timer alarm ch preview enter 1 2 3 4 5 6 7 8 9 0 power flshbk mute vol ume channel cc remote control part number sc652 124-213-02 flashbk (flashback) returns to the last channel viewed. Power turns tv on or off . Channel (up/down) selects nex...

  • Page 41

    206-3489-o p a g e 4 1 guest parental control menu mini glossary motion picture association of america (mpaa) rating system g general audiences content not offensive to most viewers. Pg parental guidance content is such that parents may not want their children to view the program. Suggested pg-13 pa...

  • Page 42: 4/6

    P a g e 4 2 206-3489-o guest parental control menu mini glossary tv parental guideline rating system tv-g general audience considered suitable for all audiences; children may watch unattended. Tv-pg parental guidance suggested unsuitable for younger children, may contain: suggestive dialog, bad lang...

  • Page 43

    P a g e 4 3 206-3489-o guest menus & on-screen displays volume• caption 1 is on cc press the remote keys indicated below to access these menus and displays sleep timer menu press timer. Press repeatedly to set the sleep timer. Shows remaining time before tv shutoff. Volume display press volume. Show...

  • Page 44

    2/5/02 206-3751 issue* copyright 2002 zenith electronics corporation your zenith tv warranty for customer support/service please call: 1-888-865-3026 www.Zenith.Com direct-view color tv welcome to the zenith family! We believe that you will be pleased with your new zenith tv. Please read this warran...