1. DL manuals
  2. Zenith
  3. Speakers
  4. D60DVSA
  5. Installation And Setup Manual

Zenith D60DVSA Installation And Setup Manual

Manual is about: 60V PDP Speakers & Speaker Stand

Summary of D60DVSA

  • Page 1

    P/no : 3828va0279b d60dvsa d60dvsas d60dvsa d60dvsas 60v pdp speakers & speaker stand installation and setup guide.

  • Page 2: Speaker Installation

    2 206-3732 speaker installation - speakers can be mounted: on the monitor, (see below) on a flat desk-type surface. (see page 3) or, on the floor. (see page 3) speakers mounted on the monitor speakers mounted on the monitor ,,,,,,, ,,,,,,, ,,,,,,, ,,,,,,, ,,,,,,,.

  • Page 3

    3 206-3732 speakers shown mounted on the speaker stands speakers shown mounted on the speaker stands speakers shown mounted on the floor stands speakers shown mounted on the floor stands.

  • Page 4: 60V Pdp Speakers

    4 206-3732 mounting speakers on monitor mounting speakers on monitor g caution: always lift the monitor itself (not the speakers) when handling or moving the monitor after speakers have been installed. When screwing bolts into the monitor and speakers, tighten the bolts enough so that they are secur...

  • Page 5

    5 206-3732 connecting speakers to the monitor using the speaker wires provided connecting speakers to the monitor using the speaker wires provided (+) ( ) (+) ( ) audio (mono) r l av input component (480i/480p/720p/1080i) (dvd/dtv input) rgb-pc input r audio input s-video external speaker r l l audi...

  • Page 6

    6 206-3732 4-iron plates (mount speakers to monitor.) 8- small bolts (attach iron plates to speakers.) 4-large bolts (attach iron plates to monitor.) 2-speaker wire holders (for arranging the speaker wires.) 2-speaker wires installation and setup guide accessories accessories zenith.

  • Page 7

    7 206-3732 specifications specifications name of product impedance (ohms) rated input (watts) maximum input (watts) width (inches / mm) 60v pdp speakers 8 10 20 5.3 / 135 height (inches / mm) 34.8 / 883 depth (inches / mm) 3.9 / 99 weight (pounds / kg) 5.5 / 2.5.

  • Page 8: 60V Pdp Speaker Stand

    8 206-3732 g assemble each speaker stand and speaker by screwing the two bolts in the clockwise direction shown in 1 above. See the magnified view to identify the two screw bolt holes. To detach the speaker form the stand, unscrew the two bolts in the opposite direction. Speaker speaker stand how to...

  • Page 9

    9 206-3732 accessories accessories 4 bolts installation and setup guide specifications specifications name of product width (inches / mm) height (inches / mm) depth (inches / mm) weight (pounds / kg) 60v pdp speaker stand 8.7 / 220 8.6 (38.5) / 218 (978.5) *the value in ( ) is the height of the asse...

  • Page 10: Memo

    10 206-3732 memo.

  • Page 11: Memo

    11 206-3732 memo.

  • Page 12

    206-3732.