- DL manuals
- Zenith
- Plasma TV
- P60W26 Series
- Owner's Manual
Zenith P60W26 Series Owner's Manual - Front Panel Controls
Summary of P60W26 Series
Page 1
Plasma displa y p anel on/off input select volume p/no : 3828va0277v (np00kb) plasma displa y p anel please read this operating guide carefully before using the monitor. Keep the operating guide with the monitor. For future reference, write down the serial number on the back of the monitor in the sp...
Page 2
On/off input select volume warning to reduce the risk of fire and electric shock, do not expose this prod- uct to rain or moisture. The explanation about colored dots may be present on pdp screen the pdp which is the display device of this product is composed of 0.9 to 2.2 million cells and a few ce...
Page 3: Table of Contents
Keep this manual with monitor for future easy refer- ence) table of contents first step warnings ..............................................................4 safety instructions........................................5 monitor overview front panel controls ...........................................
Page 4: Warnings
4 warnings warning: to reduce the risk of electric shock do not remove cover (or back). No user serviceable parts inside. Refer to qualified service personnel. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dan...
Page 5: Safety Instructions
5 safety instructions monitor overview connections basic operation sleep timer picture & sound special features others important safeguards for you and your new product your product has been manufactured and tested with your safety in mind. However, improper use can result in potential electrical sh...
Page 6: Safety Instructions
6 safety instructions the openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventila- tion is provided or the manufacturer’s instructions have bee...
Page 7
7 safety instructions monitor overview connections basic operation sleep timer picture & sound special features others product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. ...
Page 8: Front Panel Controls
8 front panel controls on/off on/off input select volume input select volume main power button input select button power standby indicator illuminates red in standby mode, illuminates green when the monitor is turned on sub power button volume ( f f , g g ) buttons remote control sensor.
Page 9: Connection Panel Overview
9 safety instructions monitor overview connections basic operation sleep timer picture & sound special features others (+) ( ) (+) ( ) (+) ( ) (+) ( ) audio (mono) r l video y p b r p av input audio r l r l external speaker (8 Ω ) ac input audio input rs-232c s-video component rgb-pc input (vga/svga...
Page 10
Remote control key functions/accessories - when using the remote control aim it at the remote control sensor on the monitor. 10 power on mute 1 3 2 4 6 5 7 9 8 video/pc menu up down vol vol enter 0 sleep system off pip input select ratio twin picture freeze easy sound position apc power on button sl...
Page 11: Accessories
11 safety instructions monitor overview connections basic operation sleep timer picture & sound special features others video/pc button on the remote control each press of this button changes the mode as shown below. S-video component video rgb as mark monitor 1.5v 1.5v accessories d-sub 15 pin cabl...
Page 12: Monitor Installation
12 monitor installation - it is recommended that this product only be used at an altitude of less than 6562 feet (2000m) to get the best quality picture and sound. - this plasma display is designed to be mounted horizontally (wide viewing). - your p60w26 (monitor) can be installed on a wall as shown...
Page 13
13 safety instructions monitor overview connections basic operation sleep timer picture & sound special features others desktop pedestal installation on/off input select volume • the monitor can be installed on a desk as shown above. (for further information, refer to the optional ‘desktop stand ins...
Page 14: Vcr Setup
14 vcr setup tips • to avoid picture noise (interference), leave an adequate distance (20 inches or more) between the vcr and monitor. S-video out in (r) audio (l) video back panel of vcr - as shown below, when connecting the monitor to a vcr, match the colors of av input jacks on the monitor with t...
Page 15: To Watch Vcr
15 safety instructions monitor overview connections basic operation sleep timer picture & sound special features others (+) ( ) (+) ( ) audio (mono) r l video y pb r p av input audio r l r l external speaker (8 Ω ) ac input audio input rs-232c s-video component (480i/480p/720p/1080i) rgb-pc input (v...
Page 16: Cable Tv Setup
16 cable tv setup - after subscribing to a cable tv service from a local provider and installing a converter, you can watch cable tv programming. This monitor cannot display tv programming without a tv tuner or cable tv converter box. Tv vcr rf cable (r) audio (l) video (+) ( ) (+) ( ) audio (mono) ...
Page 17: To Watch External Av Source
17 safety instructions monitor overview connections basic operation sleep timer picture & sound special features others r l audio video (+) ( ) (+) ( ) audio (mono) r l video y pb r p av input audio r l r l external speaker (8 Ω ) ac input audio input s-video component (480i/480p/720p/1080i) rgb-pc ...
Page 18: Dvd Setup
18 dvd setup • connect dvd video inputs to y, p b , p r of component (480i/480p/720p/1080i) (dvd/dtv input) and audio inputs to audio jacks of av input. How to connect a dvd (digital video disk player) how to use • turn on the dvd player, and insert a dvd. • press video/pc button on the remote contr...
Page 19: Dtv Setup
19 safety instructions monitor overview connections basic operation sleep timer picture & sound special features others dtv setup - to watch digitally broadcast programs, purchase/connect a digital set-top box. - you can select only the 16:9 picture format in dtv 720p/1080i mode. How to connect a us...
Page 20: Pc Setup
20 pc setup - you can easily connect the plasma display to your pc for outstanding image and sound. - use the monitor to display images and sound from a pc computer source. On the remote control how to use (+) ( ) (+) ( ) audio (mono) r l video y pb r p av input audio r l r l external speaker (8 Ω )...
Page 21
21 safety instructions monitor overview connections basic operation sleep timer picture & sound special features others monitor image display specifications 640x350 720x400 31.468 70.09 37.861 85.08 31.469 70.08 37.927 85.03 31.469 59.94 35.000 66.66 37.861 72.80 37.500 75.00 43.269 85.00 45.913 90....
Page 22
22 3 2 pc mode feature check (overview) - select rgb first, see page 11. - make sure the pc and monitor are both turned on. - use the monitor’s remote control to make adjustments. 1 press the menu button to show menus on screen. Press the vol ( g ) button and then press the up/down or vol button to ...
Page 23: Pc Mode Adjustments
23 safety instructions monitor overview basic operation sleep timer picture & sound special features others connections 1 3 pc mode adjustments press the up/down button to select screen and then press the vol ( g ) button. If picture needs to be adjusted more after auto adjustment, you can manually ...
Page 24: Pc Mode Adjustments
24 3 2 1 press the up/down button to select screen and then press the vol ( g ) button. Adjusting horizontal / vertical position manually ready press the up/down button to select v-posi- tion or h-position and then press the vol ( g ) button. • the adjustment range of v-position is -50 ~ +50. • the ...
Page 25
25 safety instructions monitor overview basic operation sleep timer picture & sound special features others connections 3 2 1 use the up/down button to select screen and then press the vol ( g ) button. Picture phase adjustments ready • if the picture isn’t clear after auto adjustment and especially...
Page 26
26 picture in picture (pip) function - pip lets you view 2 different inputs (sources) on your monitor screen at the same time. One source will be large, and the other source will show a smaller inset image. - select rgb input source before pressing pip. - this function works only in the following re...
Page 27
27 safety instructions monitor overview basic operation sleep timer picture & sound special features others connections selecting the source input signal press the input select button in pip mode. • each time you press input select button, you toggle video , s-video and component . Component source ...
Page 28
28 3 2 1 use the up/down button to select pip / dw and then press the vol ( g ) button. Ready use the up/down button to select sound select and then press the vol ( g ) button. • each time you press up/down button, you toggle between sound [ m ] or sound [ s ]. Press the vol buttons to select main i...
Page 29: Twin Picture Mode
29 safety instructions monitor overview basic operation sleep timer picture & sound special features others connections twin picture mode - as the name suggests, this mode splits the screen into 2, allowing 2 sources to be shown on the monitor screen at the same time. Each source is given half the s...
Page 30: Twin Picture Mode
30 twin picture mode selecting a source for the twin picture press the input select button in twin picture mode. • each time you press input select button, you toggle video , s-video and component . Component source only works in 480i input signal. Pip input f video g video s-video component input s...
Page 31: Using The Remote Control
31 safety instructions monitor overview basic operation sleep timer picture & sound special features others connections using the remote control installing batteries • open the battery compartment cover on the back of the remote control and insert the batteries with correct polarity, match “+” with ...
Page 32: Turning On The Monitor
32 turning on the monitor 3 2 1 2 1 - when using the remote control, aim it at its sensor on the monitor. Turning on the monitor just after installation turning on the monitor (power cord is still connected) connect power cord correctly. Press the main on/off button on the monitor. At this moment, t...
Page 33
33 safety instructions monitor overview connections basic operation sleep timer picture & sound special features others selecting language for the menus 3 2 1 ready press the up/down button to select language and then press the vol ( g ) button. Press the up/down button to select the desired languag...
Page 34: Checking Features
34 1 3 2 press the menu button. Press the up/down button. • each press will cycle through the menus shown below. Checking features press the vol ( g ) button to select a feature to adjust, and then press the up/down or vol buttons to adjust the selected item. • press the enter button to exit. Apc g ...
Page 35: Setting Sleep Timer
35 safety instructions monitor overview connections basic operation sleep timer picture & sound special features others setting sleep timer sleep timer turns the monitor off after a preset time press the sleep button to set sleep time. Each time you press sleep button, the next preset setting time i...
Page 36: Auto Picture Control
36 2 1 apc (auto picture control) press the apc button. Press the apc or vol buttons to select your desired picture condition. • each press of vol buttons changes the screen display as shown below. • you can also select clear , soft or user in the pic- ture menu. User refers to adjustments you made ...
Page 37: Adjusting Picture Appearance
37 safety instructions monitor overview connections basic operation sleep timer picture & sound special features others 2 1 ready example : changing the contrast. Press the up/down button to select contrast and then press the vol ( g ) button. • adjust brightness , color , tint and sharpness in the ...
Page 38
38 drp (digital reality picture) drp improves image outlines in dark screens. 3 1 ready press the up/down button to select drp and then press the vol ( g ) button. Press the enter button. Apc g drp g contrast 100 g brightness 50 g color 50 g tint 0 g sharpness 50 g clear soft picture drp 2 press the...
Page 39: Adjusting Sound
39 safety instructions monitor overview connections basic operation sleep timer picture & sound special features others adjusting sound manual setting 2 1 ready example : adjustment treble use the up/down button to select treble and then press the vol ( g ) button. • adjust bass and balance in the s...
Page 40: Auto Sound Control
40 auto sound control dasp (digital auto sound processing) • this function lets you enjoy the best sound without any manual adjustment because the monitor automatically selects the appropriate audio tone levels based on the program content. 1 press the easy sound button. 2 press the easy sound or vo...
Page 41: Avl (Auto Volume Leveler)
41 safety instructions monitor overview connections basic operation sleep timer special features others picture & sound avl (auto volume leveler) this feature maintains an equal volume level; even if you change channels. 3 1 ready press the up/down button to select avl and then press the vol ( g ) b...
Page 42: Using Still Function
42 using still function 1 2 press the freeze button. • the image displayed is frozen(still). • the sub picture is stilled in pip or twin picture mode. • in pip or twin picture modes, the sub (inset) picture is frozen. To return to normal viewing, press the freeze button again. Tips • if still pictur...
Page 43: Using The Screen Options
43 safety instructions monitor overview connections basic operation sleep timer picture & sound special features others 3 2 1 ready use the up/down button to select screen and then press the vol ( g ) button. Use the up/down buttons to select tv or vcr . • select the vcr option if watching a vcr. • ...
Page 44: Adjusting Osd Transparency
44 adjusting osd transparency to make the menus clear or opaque 3 2 1 ready press the up/down button to select transparency and then press the vol ( g ) button. Press the vol buttons to adjust osd transparency. • the adjustment range of transparency is 0 ~ 5. Press the enter button to remove menu. P...
Page 45: Adjusting Color Temperature
45 safety instructions monitor overview connections basic operation sleep timer picture & sound special features others ready press the menu button and then press the up/down button to select special menu. Press the vol ( g ) button. Adjusting color temperature 3 2 1 press the up/down button to sele...
Page 46: Setting Picture Format
46 setting picture format press the ratio button to select a desired picture format. • you can also select 16:9 , 4:3 or zoom in the special menu. • each time you press ratio or vol buttons, you can select 16:9 , 4:3 or zoom alternatively. Arc f 16 : 9 g arc f 4 : 3 g arc f zoom g - you are availabl...
Page 47
47 safety instructions monitor overview connections basic operation sleep timer picture & sound special features others - connect the rs-232c input jack to an external control device (such as a computer or an a/v control system) and control the monitor’s functions externally. - when you connect a co...
Page 48
48 external control device setup type of connector : d-sub 9-pin male * use a null modem cable. Wire the 7-wire cable so that each pair of data lines cross between the two devices. These data line pairs are rxd (receive data) and txd (transmit data), dtr (dte side ready) and dsr (dce side ready), an...
Page 49
49 safety instructions monitor overview connections basic operation sleep timer picture & sound special features others rs-232c configurations 2 3 5 4 6 7 8 rxd txd gnd dtr dsr rts cts txd rxd gnd dsr dtr cts rts pc 7-wire configuration (standard rs-232c cable) db 9 control line 3 2 5 6 4 8 7 pdp db...
Page 50
50 1 use the up/down buttons to select set id and then press the vol ( g ) button. • use this function to specify a monitor id number. Set id ready press the menu button and then press the up/down button to select special menu. Press the vol ( g ) button. 2 use the vol button to adjust set id to cho...
Page 51
51 safety instructions monitor overview connections basic operation sleep timer picture & sound others special features communication parameters command reference list - the rs-232c input jack is used to control the monitor’s functions using an external control device. • baud rate : 2400 bps (uart) ...
Page 52
52 external control device setup 01. Power (command:p) g to control power on/off of the monitor. Transmission data 0 : power off 1 : power on * example : power on for set id no.3. Type : p 3 1 ‘0x0d’ [p][ ][set id][ ][data][cr] acknowledgement data 0 : power off 1 : power on * in example : monitor a...
Page 53
53 safety instructions monitor overview connections basic operation sleep timer picture & sound others special features * real data mapping 0 : step 0 a : step 10 f : step 15 10 : step 16 64 : step 100 06. Volume control (command:v) g to adjust volume. You can also adjust volume with the volume butt...
Page 54
54 external control device setup 12. Osd select (command:d) g to select osd (on screen display) on/off. Transmission * the remote control and monitor front panel controls (except main power) are not operable when the monitor is set up to be controlled by the pc computer. * this function is “read onl...
Page 55
55 safety instructions monitor overview connections basic operation sleep timer picture & sound special features others * component source only works in 480i input signal. 16. Pip sound select (command:u) g to select main or sub (inset) sound for pip/twin picture. You can also select sound select in...
Page 56: Note
56 note.
Page 57: Maintenance
57 safety instructions monitor overview connections basic operation sleep timer picture & sound special features others others maintenance cleaning the screen 1. Here’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and a little fabric softe...
Page 58: Troubleshooting Check List
58 no output from one of the speakers • adjust balance in the sound menu. (refer to p.39) troubleshooting check list no picture & no sound • check whether the monitor is turned on. • power cord inserted into wall outlet? • plug another product’s power cord into the wall outlet where the monitor’s po...
Page 59: Product Specifications
59 safety instructions monitor overview connections basic operation sleep timer picture & sound special features others product specifications model width (inches / mm) height (inches / mm) depth (inches / mm) weight (pounds / kg) power requirement resolution color temperature (in operation) humidit...