- DL manuals
- Zenith
- DVD VCR Combo
- XBV442
- Installation And Operating Manual
Zenith XBV442 Installation And Operating Manual
Summary of XBV442
Page 2
2 safety precautions this lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The excl...
Page 3
Introduction 3 important safety instructions 1. Read these instructions. - all these safety and oper- ating instructions should be read before the product is operated. 2. Keep these instructions. - the safety, operating and use instructions should be retained for future refer- ence. 3. Heed all warn...
Page 4
4 table of contents introduction safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . 2 important safety instructions . . . . . . . . . . 3 table of contents . . . . . . . . . . . . . . . . . . . . . . . . . . 4 before use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5...
Page 5
Introduction 5 before use playable discs dvd (8 cm/12 cm disc) audio cd (8 cm/12 cm disc) in addition, this unit can play , kodak picture cds dvd+r/rw, dvd-r/rw and cd-rs or cd-rws that contain audio titles, mp3, jpeg or wma files. Otes depending on the conditions of the recording equipment or the c...
Page 6: Yes
6 before use (continued) precautions handling the unit when shipping the unit the original shipping carton and packing materials come in handy. For maximum protection, re-pack the unit as it was originally packaged at the factory. When setting up the unit the picture and sound of a nearby tv, vcr, o...
Page 7
7 introduction front panel controls open/close (z z ) opens or closes the disc tray. Remote sensor point the dvd+vcr remote control here. Disc tray (dvd deck) insert a disc here. Power switches the dvd+vcr on and off. Dvd/vcr (output select) select the dvd or vcr output source to view on the tv scre...
Page 8
8 display window dvd vcr rec pm tv [p] dvd+vcr is in timer recording or a timer recording is programmed.(vcr part only) a cassette is in the vcr deck. The vcr deck is selected. Dvd+vcr is recording. (vcr part only) indicates pm time. (am is not displayed.) lights when tv mode is active (see page 22....
Page 9
9 introduction remote control power turns dvd+vcr on and off. Dvd select the dvd+vcr function mode to dvd. Vcr select the dvd+vcr function mode to vcr. Input selects the vcr deck’s source (tuner, line 1, or line 2). 0-9 numerical buttons selects numbered options in a menu. Selects tv’s channel. Tv/v...
Page 10
10 connections panel vcr in line 1 (video in/audio in (left/right)) connect the audio/video output of an external source (audio system, tv/monitor, another vcr). Ant.In (antenna input) connect the vhf/uhf/catv antenna to this terminal. Dvd/vcr out (video/audio (left/right)) connect to a tv with vide...
Page 11
Prep ara tion 11 connections ips depending on your tv and other equipment you wish to connect, there are various ways you could connect the dvd+vcr. Use connections described on pages 11-13. Please refer to the manuals of your tv, vcr, stereo system or other devices as necessary to make the best con...
Page 12
12 connections (continued) basic tv connections make one of the following connections, depending on the capabilities of the equipment to be connected. Rf coaxial connection connect the rf.Out jack on the dvd+vcr to the antenna in jack on the tv using the 75-ohm coaxial cable supplied (r). Ote if you...
Page 13
Prep ara tion 13 connections (continued) optional, preferred tv connections ote you can only listen to dvd playback using coaxial (x) and audio out (a2) connections. The tuner and vcr will still be heard through the rf.Out (r) or dvd/vcr audio out (a1) jack. (see page 12.) connecting to an amplifier...
Page 14
14 vcr operation setup on-screen display (osd) some of these functions will be displayed every time the dvd+vcr is operated. ❶ ❷ ❸ ❹ ❺ ❻ ❼ ❶ tape speed display shows the current tape speed. ❷ function display indicates the current function. ❸ hi-fi display indicates when this unit is playing back ta...
Page 15
15 prep ara tion vcr setup menu options 11 press menu and the main menu will appear. 22 use v v /v v to select the setup menu, then press enter. The setup menu will appear. 33 use v v /v v to choose a desired option on the setup menu. Then use b b /b b to make adjust- ments. Function osd the on-scre...
Page 16
16 vcr operation setup (continued) setting the clock the dvd+vcr gives you two ways to set the time and date: the auto clock feature or manually. The auto clock feature enables the dvd+vcr to set up the clock while the dvd+vcr is turned off. Auto clock set the auto clock set feature is set to on at ...
Page 17
Prep ara tion 17 dvd operation setup general explanation this manual gives the basic instructions for operating the dvd+vcr. Some dvds require specific operation or allow only limited operation during playback. When this occurs, the symbol appears on the tv screen, indicating that the operation is n...
Page 18
Dvd operation setup (continued) initial settings you can set your personal preferences on the dvd+vcr. General operation 11 press setup. The setup menu appears. 22 use v v /v v to select the desired option. The screen will show the current setting for the selected option, as well as alternate settin...
Page 19
Prep ara tion 19 dvd operation setup (continued) sound digital audio output each dvd disc has a variety of audio output options. Set the dvd+vcr’s digital audio output according to the type of audio system you use. Dolby digital/pcm: select dolby digital/pcm if you have connected the dvd+vcr’s digit...
Page 20
20 dvd operation setup (continued) parental control rating movies on dvds may contain scenes not suitable for children. Therefore, discs may contain parental control information that applies to the complete disc or to certain scenes on the disc. These scenes are rated from 1 to 8, and alternatively,...
Page 21
Opera tion 21 vcr operation normal playback preparation: turn on the tv. Tune the tv to the dvd+vcr output channel (ch 3 or 4) or set the tv’s source selector to video. If a direct video/audio connection is made between the dvd+vcr and the tv, set the tv’s source selector to video. Set the output so...
Page 22
22 vcr operation (continued) normal recording preparation: turn on the power of both the dvd+vcr and tv. Tune the tv to the dvd+vcr output channel (ch 3 or 4) or set the tv’s source selector to video. If a direct video/audio connection is made between the dvd+vcr and the tv, set the tv’s source sele...
Page 23
Opera tion 23 vcr operation (continued) 1100 use v v to choose the speed option. Use b b /b b to choose the desired recording speed (auto, sp or slp). Auto mode determines how much tape is left and switches speed from sp to slp, if necessary, to complete recording the program. There will be some pic...
Page 24
Instant timer recording instant timer recording allows you to make a recording easily of a preset length without using the program timer. Preparation: turn on the power of both the dvd+vcr and the tv. Be sure the tv is tuned to the dvd+vcr output channel (3 or 4). If a direct video/audio connection ...
Page 25
Opera tion 25 vcr operation (continued) vhs hi-fi stereo system/ mts broadcast this dvd+vcr is equipped with the vhs hi-fi audio sound system for recording and playback. The informa- tion below gives a brief description of hi-fi audio and how to record and play a tape in the hi-fi audio mode. Playba...
Page 26
26 vcr operation (continued) tape counter memory feature real-time counter shows length of tape run in hours, minutes, and seconds. Press clk/cnt to select the real-time counter display. Every press of clk/cnt changes the tv screen as illustrated below. Counter changes to “0:00:00” when the cassette...
Page 27
Opera tion 27 dvd operation playing dvds playback setup turn on the tv and select the video input source con- nected to the dvd+vcr. Audio system: turn on the audio system and select the input source connected to the dvd+vcr. Set the output source to dvd as shown in “selecting the viewing source” on...
Page 28
28 dvd operation (continued) general features (continued) still picture and frame-by-frame playback 1 press pause/step (x) during playback. The dvd+vcr will go into pause mode. 2 with a dvd, you can advance the picture frame by frame by pressing pause/step (x) repeatedly on the remote control. 3 to ...
Page 29
Opera tion 29 dvd operation (continued) general features (continued) marker search you can start playback from a memorized point. Up to nine points can be memorized. To enter a mark, follow these steps. 1 during disc playback, press marker when playback reaches the spot that you want to memorize. Th...
Page 30
30 audio cd and mp3/wma disc operation playing audio cds and mp3/wma discs the dvd+vcr can play mp3/wma formatted record- ings on cd-rom, cd-r or cd-rw discs. Before playing mp3/wma recordings, read the notes on mp3/wma recordings on right. 11 insert a disc and close the tray. Audio cd; audio cd men...
Page 31
Opera tion 31 audio cd and mp3/wma disc operation (continued) pause 1 press pause/step (x) during playback. 2 to return to playback, press n (play) or press pause/step (x) again. Selecting other tracks press skip . Or > briefly during playback to go to the next track or to return to the beginning of...
Page 32
32 jpeg file operation viewing jpeg files on a disc this dvd+vcr can play discs with jpeg files and kodak picture cds. Before playing jpeg recordings, read the notes on jpeg files on right. 1 insert a disc and close the tray. The mp3/wma-jpeg selection menu appears on the tv screen. 22 use 3 3 /4 4 ...
Page 33
Opera tion 33 programmed playback wma mp3 cd programmed playback with audio cds and mp3/wma discs the program function enables you to store your favorite tracks from any disc in the player memory. Program can contain 30 tracks. 11 press program during playback or in the stop mode to enter the progra...
Page 34
34 controlling your tv with the supplied remote you can control the sound level, input source, and power switch of your lg tv with the supplied remote. You can control your tv using the buttons below. By pressing you can power turn the tv on or off. Input switch the tv’s input source between the tv ...
Page 35
Troubleshooting reference 35 symptom no power. The power is on, but the dvd+vcr does not work. No picture. No sound. The playback picture is poor. The dvd+vcr does not start playback. The remote control does not work properly. Cause the power cord is disconnected. No disc is inserted. No tape is ins...
Page 36
36 symptom some channels are skipped over when using ch/trk (v/v) picture and sound of broadcasting channel are weak or missing. Camcorder image is not shown. Camcorder image via a/v input to dvd+vcr is not shown on tv screen. Timer recording is not possible. Indicator appears after dvd+vcr is turne...
Page 37
Reference 37 language code list language code abkhazian 6566 afar 6565 afrikaans 6570 albanian 8381 amharic 6577 arabic 6582 armenian 7289 assamese 6583 aymara 6588 azerbaijani 6590 bashkir 6665 basque 6985 bengali; bangla 6678 bhutani 6890 bihari 6672 breton 6682 bulgarian 6671 burmese 7789 byeloru...
Page 38
38 code country ad andorra ae united arab emirates af afghanistan ag antigua and barbuda ai anguilla al albania am armenia an netherlands antilles ao angola aq antarctica ar argentina as american samoa at austria au australia aw aruba az azerbaidjan ba bosnia-herzegovina bb barbados bd bangladesh be...
Page 39
39 specifications reference general power requirements ac 120v, 60 hz power consumption 19 w dimensions (approx.) 16.9" x 3.1" x 10.8" (430 x 78.5 x 273 mm) (w x h x d) weight (approx.) 8.82 lbs (4.0 kg) operating temperature 5˚c to 40˚c (41˚f to 104˚f) operating humidity 5 % to 90 % signal system n...
Page 40
Lg will repair or replace your product, at lg’s option, if it proves to be defective in material or workmanship under normal use, during the warranty period (“warranty period”) listed below, effective from the date (“date of purchase”) of original consumer purchase of the product. This warranty is g...