10-8 Video Digital Evidence Solutions In-Car Video System Installation & User Manual - page 11
20
21
Hardware: Installation
2.4GHZ Wireless Mic
Ifyourdepartmentoptedforournew2.4ghzwirelessmicrophonesystem,
congratulations!Thisisanincrediblewirelessmicrophonewithexcellent
rangeandclarity.Theinstallationiseasyandstraightforward.
1
Findasuitableplaceinthevehicleforthebasestation/receiver.
Abracketisincluded.Itshouldbemountedinaneasilyaccessible
position.Besurethereisroomtoeasilyinsertandremovethe
transmitterinthecradle.
2
ConnecttheRED wire(labeledPWR)toapositive12vsource.
3
ConnecttheBLACK wire(labeledPWRGND)toaground.
IfyouhookedupthebrowntriggerleadtotheDVRforremoteactivation,
thereisonesettingthatneedschangedintheDVR:
Trigger REC DVR Set-up
1
Poweronthesystem.
2
Pressthe‘Menu’keyontheremote.
3
Usethearrowkeystoselect‘Alarm’.
4
Select‘Alarm In’.
5
Onthenextscreenonthe3rdSensorline,UnderEnable,changeto
‘ON’
6
ChangePwrto‘Low’.
7
ChangeRecto‘ON’.
8
ChangeAlarmto‘ON’.
9
Scrolldownto‘Save’andselecttosavethechanges.
(Default Password: 111111)
Black Wire (Audio Out)
1
PlugthemaleRCAplugintothefemaleredRCAplugcomingfrom
theCamera1WireHarness.(FIG3).
All of the wires are labeled from the factory. For this installation,
there are 3 wires that will not be used for this installation:
•
a white wire labeled ‘Mute Indication’
•
a black wire labeled ‘Trigger Gnd’
•
an orange wire labeled ‘ TX indication’.
These wire can be cut or tucked away.
Brown Wire (Trigger REC)
Onewire’suseisoptional;thesmallbrownwirelabeled‘TriggerREC’.If
thiswireisconnectedtotheSensor‘IN’#3leadfromthebackoftheDVR
(FIG2),thentheDVRwillbeginrecordingwhenthetalkbuttonon
transmitterisactiveandlit.
Inotherwords,ifanofficerkeepstheirmiconstand-bywhennotinuse,
thenwhentheyactivatewiththe‘talk’buttontobegintransmittingitwill
activatetherecorder.Thisisusefulwhenoutsidethecarandnotrecording,
andthenasituationcomesupandtheofficerneedstoactivatetherecorder
remotelytobeginrecording.Thisisonlyoptionalandshouldbeleftupto
thedepartmentorofficerofthevehicle.
2.4GHZ Wireless Mic Installation