1001Espions F8 Mirror Operating Instructions Manual - Www.1001Espions.Com | 10
www.1001espions.com | 10
w
w
w
.
1
0
0
1
e
s
p
i
o
n
s
.
c
o
m
DISPLAY SETTING
TIME IS SHOWN BY VOICE CONTROL
- To enter to voice control mode, press and hold the „DOWN‟
key for 2 seconds, one „Bi‟ sound is occurred. At the normal
time display state, LCD is hidden on the mirror.
- The time is shown and blue lighting is ON when users
clapping hands and touching the screen lightly.
- It will be switch off automatically after 6 seconds.
(Note: Default mode is voice control mode after replace battery
and reset.)
TIME IS SHOWN BY PUSHING DISPLAY
- To enter to „pushing‟ mode, press and hold the „DOWN‟ key
for 2 seconds, two „Bi‟ sound is occurred.
- The time is shown and blue lighting is ON when pushing the
clock backward.
- It will be switch off automatically after 6 seconds.
TIME IS ALWAYS SHOWN
- To enter to „All ON‟ mode, press and hold the „DOWN‟ key for
2 seconds, three „Bi‟ sound is occurred.
- The time is shown and blue lighting is always ON.
INQUIRY OF DATE & ALARM
INQUIRY DATE:
- At the normal time display state, press „TIME‟ key or push
the clock backward, the time is shown on mirror.
- Keep pressing „TIME‟ key or push the clock backward, then
display by turn:
TIME – DATE - TIME.
INQUIRY ALARM:
- At the normal time display state press „ATM‟ display alarm
state, keep pressing the „ALM‟ key display by turn:
ALM1 –ALM2 – ALM3 – ALM1
- If no alarms are set, the display will show „--:--‟
CLOCK SETTING
TIME SETTING
- At the state of normal time display, press and hold „TIME‟ key
for 3 seconds to enter hour setting mode.
- „Hour‟ display is blinking, press „UP‟ or „DOWN‟ to set hours
display.
- Press „TIME‟ key enter to minute setting mode, „Minute‟
display is blinking, press „UP‟ or „DOWN‟ to set minute time.
- Press „TIME‟ key enter to second setting mode, second
setting can only be set to Zero by pressing „UP‟ or „DOWN‟
key.
- Press „TIME‟ key to save and back to the time state.
DATE SETTING