1001Espions F8 Mirror Operating Instructions Manual - Www.1001Espions.Com | 3
www.1001espions.com | 3
w
w
w
.
1
0
0
1
e
s
p
i
o
n
s
.
c
o
m
Key instructions: K4 key is used to reset the machine when the
encounter did not respond, press the reset button K4.
K1 key: used to switch machines, a separate
recording.
K2 key: used to take pictures. Camera.
K3 key: for motion detection camera.
Instructions
Special features of this product: shock prompts, can be directly
connected to the computer video camera, video camera can be
directly stored computer files.
Special features: In the state of the network camera (note 6)
click on the Driver disk files (CCYCR video camera assistant)
Click to select the path, set the video files are stored. Camera:
Click Start video camera, into the video. Click to stop video
camera, camera stop and save.
1, switch machines: long press the power key K1, red and blue
dual-lamp lit, initialization after blue light, red light, into the
standby mode, the boot mode, press K1 key, the machine
lights flash 3 times off.
2, camera operator: In standby mode, short press K2 key, blue
light red light off, take the picture and save, photo shoot out
blue light, red light, re-enter the standby state.
3, camera operator: In standby mode, press the K2 key, red
light flashes 3 times off, start recording them in the camera,
press K1 or K3 key off the red light flashes six times, indicating
when the camera status the state. Camera, the short press K2
key machine, stop recording and save, while the red light to
enter the standby state.
4, a single recording: In the standby mode. Press K1 key, red
light off the blue light flashes 3 times off, that time is recorded,
and then press K1 key, the machine vibration time, to save the
recording blue light, red light and enters the standby state.
5, motion detection camera: In standby mode, key press about