247Security ZEUS User Manual - page 18
247Security Inc. | 4400 North Point Parkway, Suite # 158, Alpharetta, GA 30022, USA | 1-866-693-7492 | www.247securityinc.com
ZEUS mDVR
USERS MANUAL
17
This process is necessary so that the ZEUS can properly close all video/audio files and safely
turn the HDD power off. Open the door and wait until only the ignition light is still light before
removing the media.
2. Gently pull media storage out from the bay
3. Insert new media storage – Wait for at least 30 seconds (Power LED is OFF) then insert
new/original storage media, close the door.
4. Turn key to the “Close” or locked position:
The ZEUS will now turn the HDD power on, detect the new media and start recording again.
3.2
WIRELESS VIDEO RETRIEVAL
(Refer to Touch Down manual) the DVR can still be made WIFI ready with the use of an external WIFI
bridge available for purchase separately, or Internal WIFI.
3.3
EVENT MARKING AND RETRIEVAL
(Refer to Event Marking/USB Retrieval guide)
3.4
SD (Storage Flash) OPERATION DISK
3.4.1 OPERATION
1. Use a SD flash card 32G ADATA class 10 for ZEUS
2. Format of SD:
• Format of SD is FAT32(can use Windows7 to perform).
• Refer to the links: http://www.ehow.com/how_1000631_hard-drive-
linux.html#ixzz23PSoZHpv
3. Plugging the SD to ZEUS:
i. HDD key lock OFF, wait for all LEDs OFF excluding Ignition LED, then insert the SD in SD slot
in front panel.
(Use the same step if user wants to plug out the SD)
ii. HDD key lock ON, wait for the ZEUS boots up
4. At Boot up stage:
The Ignition LED is flashing about 30 seconds to 60 and stay
5. At the running stage:
i. The Power LED and Ignition LED (Green) are ON when system boots up completely.
ii. The Recording LED (Amber) will be ON (or flashing)
6. At Shutdown delay stage: