247Security ZEUS User Manual - page 32
247Security Inc. | 4400 North Point Parkway, Suite # 158, Alpharetta, GA 30022, USA | 1-866-693-7492 | www.247securityinc.com
ZEUS mDVR
USERS MANUAL
31
4.9.1 ENABLE CAMERA
Click the check box to enable or disable the camera input.
4.9.2 CAMERA NAME
Each camera can have a different name based on where it is located in the vehicle. The value can be up
to 16 characters long.
4.9.3 RECORDING MODE
For recording, there are three modes that you can select from. Each camera input can record in
“Continue”, “Trigger by sensor”, or No recording.
4.9.3.1
CONTINUE
The DVR is continuously recording in the background no matter what. It never stops unless the
DVR is powered down or the storage media is removed from DVR. Therefore, video files are
constantly generated in the background filling up the storage device. It is recommended this
mode to be the default mode for video recording.
4.9.3.2
TRIGGER BY SENSOR
In this mode, the DVR only records if it detects an event trigger on one of the programmable
sensors. If this is the mode you want your DVR to use then don’t forget to enable the required sensors.
4.9.3.3
NO RECORDING
This mode disables the camera input.
4.9.4 RESOLUTION
There are many modes available of video resolution and “704X480” being the highest. Selecting the
highest resolution will create larger files and shorten the storage recording time but provide a clearer image.