2easy CDV4791 Installation Manual - page 17
2
Easy 1 User Video Entry Kit
CDV4791/2
Input Voltage:
100~240Vac
Input Frequency:
50~60HzRated
Output Voltage:
DC 28V+2V
Rated Output Current:
1.5A
Working Temperature:
-10
0
C~50
0
CSW
Input Voltage:
Max 230vac, 2A
Dimension:
140 x 90 x 60mm
17
1) All components should be protected from shock or vibration, and be careful the
products are not impacted, knocked or dropped.
2) Please clean with a soft cotton cloth, please do not use a chemical cleaning agent. If
necessary, please use a little pure water or dilute soapy water to clean.
3) Image distortion may occur if the video monitor is mounted too close to a magnetic
feld eg microwaves, TV's, computers etc.
4) Please do not subject the monitor to wet, high temperature, dust, caustic and oxidation
gas environments, any of which could cause unpredictable damage.
5) Please use the right adaptor which is supplied by the manufacturer, or approved
by the manufacturer.
6) Pay attention to the
high voltage
inside the products, please refer service only to a
trained and qualifed professional.