802.11g usb wireless adapter installation guide book_802.11g usb wireless adapter.Book page 1 wednesday, june 2, 2004 3:14 pm.
Notice to users ©2004 2wire, inc. All rights reserved. This manual in whole or in part, may not be reproduced, translated, or reduced to any machine-readable form without prior written approval. 2wire provides no warranty with regard to this manual, the software, or other information contained herei...
1 2wire 802.11g usb wireless adapter 2wire’s 802.11g usb wireless adapter is a wireless networking device that is connected to a usb port on your computer using a usb cable. Wireless networking provides the same connectivity as ethernet without the wires. Expanding or redesigning your network is eas...
2 step 1: install the 2wire 802.11g usb wireless adapter the supplied usb cable has a different type of usb connector on each end. Series a connector. The series a usb connector plugs into the usb port on your computer. Mini series b connector. The series b usb connector plugs into a usb device. To ...
3 step 2: install the 2wire 802.11g usb wireless adapter driver installing drivers for windows xp 1. Power on your computer. Insert the wireless client setup cd into the cd-rom drive. 2. When the found new hardware wizard window opens, select install the software automatically (recommended) and clic...
4 3. The driver installs. 4. When the completing the found new hardware wizard opens, click finish . 5. Continue to appendix a on page 11 to configure the adapter to work with your 2wire gateway. Book_802.11g usb wireless adapter.Book page 4 wednesday, june 2, 2004 3:14 pm.
5 installing drivers for windows 2000 1. Power on your computer. Insert the wireless client setup cd into the cd-rom drive. 2. When the found new hardware wizard window opens, click next to continue. 3. The next window prompts you to install device drivers. Select search for a suitable driver for my...
6 4. When the locate driver files window opens, uncheck floppy disk drives , select the cd-rom checkbox , and click next 5. When the driver files search results window opens, click next . Book_802.11g usb wireless adapter.Book page 6 wednesday, june 2, 2004 3:14 pm.
7 6. When the completing the found new hardware wizard opens, click finish . Your installation is complete. 7. Continue to appendix a on page 11 to configure the adapter to work with your 2wire gateway. Installing drivers for windows me 1. Power on your computer. Insert the wireless client setup cd ...
8 3. After the driver files are copied, click finish . 4. If the system settings change window opens, click yes to restart your computer. Your installation is complete. 5. Continue to appendix a on page 11 to configure the adapter to work with your 2wire gateway. Installing drivers for windows 98 se...
9 2. When the next window opens, select search for a better driver for your device (recommended) , and click next . 3. Uncheck floppy disk drives , select the cd-rom drive checkbox, and click next . Book_802.11g usb wireless adapter.Book page 9 wednesday, june 2, 2004 3:14 pm.
10 4. Windows locates the best driver for your device. Click next to continue. 5. After the drivers are copied, click finish . 6. If the system setting change window opens, click yes to restart your computer. Your installation is complete. 7. Continue to appendix a on page 11 to configure the adapte...
11 appendix a: wireless adapter configuration now that you have installed the drivers for your wireless adapter, you must configure it to work with the 2wire gateway. A wireless network requires a network name (ssid) and an encryption key to operate. Every 2wire wireless gateway comes with a unique ...
Regulatory information fcc statement this device has been tested and complies with the specifications for a class b digital device, pursuant to part 15 of the fcc rules. These rules are designed to provide reasonable protection against harmful interference in a residential installation. This equipme...
5100-000245-000 rev b book_802.11g usb wireless adapter.Book page 1 wednesday, june 2, 2004 3:14 pm.
