2x3 ésprit DT User Manual - page 17
of
28
17
Touch all dimmed areas on the whiteboard starting from the top left corner.
Touch the area and wait for the calibration to finish (green icon is displayed and the next cali-
bration area is dimmed).
After the calibration is completed for the bottom right corner, wait for the calibration data to
be stored in the whiteboard memory.
The calibration data are stored and re-calibration is not required after PC restart.
11. Installing ésprit DT software
Run EspritDT_V4.4.exe to install whiteboard software.
Press ‘OK’ to select language version for the software.