3Com 3040 Getting Started Manual - page 4
3Com Router 3000 ADSL2+ Family Getting Started Guide
2
LEDs
LED Description
LAN0/LAN1/LAN2/LAN3/WAN
OFF means no link is present.
ON means a link is present.
Blinking means data is being sent or/and received on
the AUX port.
SYS
Blinking means the system is operating normally.
Steady ON or OFF means the system is improperly
operating.
PWR
OFF means no power is being supplied.
ON means power is being supplied.
Console port
Attribute Description
Connector RJ45
Interface standard
Asynchronous RS232
Baud rate
9600 (default) to 115200 bps
Service
Connection to an ASCII terminal
Connection to the serial interface on a PC to run the
terminal emulation program on the PC
Command line interface (CLI)
Auxiliary (AUX) port
Ethernet interface
Attribute 10BASE-T
10/100BASE-T
Connector RJ45
Interface type
MDI/MDIX auto-sensing
Operating mode
10 Mbps
Full duplex/half duplex
10/100 Mbps auto-sensing
Full duplex/half duplex
Supports only L2 switching