Http://www.3com.Com/ part number 900-0346-01 published july 2006 nbx ® feature codes guide for sip telephones nbx networked telephony solutions system release 6.0
3com corporation 350 campus drive marlborough, ma 01752-3064 copyright © 1998–2006, 3com corporation. All rights reserved. No part of this documentation may be reproduced in any form or by any means or used to make any derivative work (such as translation, transformation, or adaptation) without writ...
3 a bout t his g uide how to use this guide 5 conventions 5 documentation 6 comments on the documentation 6 1 f eature c odes overview 9 general instructions 9 using the nbx netset utility 10 starting the nbx netset utility 10 navigating the nbx netset utility 11 how to enter a feature code 11.
4.
A bout t his g uide this guide is intended for anyone using a 3com 3108 wireless telephone or third-party ip telephone on an nbx system. It describes nbx ® features that are accessible on ip telephones connected to the nbx system running in session initiation mode (sip) mode. In addition to 3com leg...
6 a bout t his g uide table 2 lists conventions that are used throughout this guide. Documentation the documentation set for 3com nbx networked telephony solutions is designed to help nbx telephone users, installers, and administrators maximize the full potential of the system. The nbx resource pack...
Documentation 7 please send your e-mail comments about this guide or any of the 3com nbx documentation and help systems to: voice_techcomm_comments@3com.Com include the following information with your comments: ■ document title ■ document part number (found on the front or back page) ■ page number a...
8 a bout t his g uide.
1 f eature c odes this guide describes the nbx features that are accessible on 3com 3108 wireless telephones and third-party ip telephones that are connected to the nbx system running in sip mode. This guide focuses primarily on the nbx feature code sequences and covers these topics: ■ overview ■ ge...
10 c hapter 1: f eature c odes for instructions on other supported features that your ip telephone may support such as, dialing and answering calls, using speed dials, or accessing a directory, refer to the documentation supplied with your phone. The steps for setting up and accessing your voice mai...
How to enter a feature code 11 3 type your nbx netset utility user identification (always your 3-digit or 4-digit telephone extension) and your nbx netset utility password, and then click ok. Navigating the nbx netset utility once you log in to the nbx netset utility, you can easily locate the infor...
12 c hapter 1: f eature c odes table 3 nbx feature codes features using codes notes account codes allow the system to track the next call that you make. Press * + 888 + * + account code + * + telephone number + send log in to the nbx netset utility and go to directory > account codes for a list of p...
How to enter a feature code 13 call forward no answer forward all calls to your call coverage point when your phone rings for a specified number of rings. Press * + 467 + * + the destination to forward calls to + send persists until you turn off the feature by entering * + 467 + send. To specify the...
14 c hapter 1: f eature c odes caller id restriction (clir — next call) restrict the nbx system from sending out your caller id information for only this call. Press * + 890 + * + dial outside party’s number + send to use this feature you must have clir features enabled for your class of service (co...
How to enter a feature code 15 password — change use this code sequence to change your nbx netset utility password. Press * + 434 + * + old password + * + new password + * + repeat your new password + send when typing your password: ■ use only 4- to 10-digit numbers ■ do not use letters, *, or # as ...
16 c hapter 1: f eature c odes.
