3Com 3C433279A Release Note - page 10
10
R
ELEASE
N
OTES
S
UPER
S
TACK
® II R
EMOTE
A
CCESS
S
YSTEM
1500 R
ELEASE
2.5
Modifying DLCI
The Digital (Data) Link Connection Identifier (DLCI) of a Frame Relay user,
cannot be modified directly from the LAN-to-LAN and Shared ISP pages
of the RAS 1500 Web Configurator. To modify the DLCI, you must use the
CLI.
Perform the following steps to change the DLCI:
a) Go to the CLI and delete the existing PVC and the user using the
following CLI commands:
RAS1500>DISABLE USER
RAS1500>DISABLE FRAME_RELAY PVC
RAS1500>DELETE USER
RAS1500>DELETE FRAME_RELAY PVC
b) Through the Web Configurator, add an entry in the LAN-to-LAN or the
Shared ISP page depending on your requirements, with the new DLCI.
This will add a PVC with the new DLCI.
Changing Datalink
RAS1500 allows you to have one datalink on the WAN interface, either
PPP or Frame Relay. You cannot modify a Frame Relay user to PPP Leased
Line or vice versa, in the modify mode in the LAN-to-LAN and Shared ISP
pages of the RAS 1500 Web Configurator. (The same holds true if you
want to change the datalink on the WAN interface from Frame Relay to
Leased Line or vice versa). To change the Datalink, you must use CLI.
Perform the following steps to change a Datalink:
a) Go to the CLI and delete the user.
If you are changing from Frame Relay to PPP Leased Line, use the
following CLI commands:
RAS1500>DISABLE USER
RAS1500>DISABLE FRAME_RELAY PVC
RAS1500>DISABLE DATALINK FRAME_RELAY INTERFACE rm0/wan:1
RAS1500>DELETE USER
RAS1500>DELETE FRAME_RELAY PVC
RAS1500>DELETE DATALINK FRAME_RELAY INTERFACE rm0/wan:1
If you are changing from PPP Leased Line to Frame Relay, use the
following CLI commands:
RAS1500>DISABLE USER
RelNotes2.5.fm Page 10 Thursday, June 8, 2000 2:42 PM