3Com 3C996-SX User Manual - page 49
Installing Advanced Server Features
41
Installing Advanced Server Features
These features are only available for Windows NT Server and Enterprise Server
operating systems.
1 Start your Windows NT system and log in. You must have Network Administrator
privileges to install the driver software.
2 Insert the enclosed 3Com Installation CD into the CD-ROM drive.
3 From the Welcome screen, click Exit. You must exit the Master Navigator to install
Advanced Server Features.
4 Click the Start menu, and then select Settings, Control Panel.
5 The Control Panel window appears. Double-click the Network icon.
6 In the Network window, click the Protocols tab.
7 Click Add.
8 The Select Network Protocol window appears. Click Have Disk.
9 The Insert Disk window appears. Type
e:\WindowsNT\BcmServ\
where “e” is the
CD-ROM drive. Click OK.
10 The Select OEM Option window appears. Click OK.
This will install the Advanced Server Features software and display a window.
From this menu, you can create a team (see “Creating a Team and Assigning NICs” on
page 42), or click OK to complete installation.
11 In the Network window, click Close.
12 When prompted to restart your computer, click Yes. After the system restarts,
Advanced Server Features should be installed.
Uninstalling Advanced Server Features
1 Start your Windows NT system and log in. You must have Network Administrator
privileges to install the driver software.
2 Click Start, and then select Settings, Control Panel.
3 Double-click the Network icon.
4 The Network window appears. Click the Protocols tab.
5 Select Advanced Server Features, and then click Remove.
6 A Warning screen appears. Click Yes to continue.
7 In the Network window, click Close.
8 When prompted to restart your computer, click Yes. When the system restarts,
Advanced Server Features will be uninstalled.
NOTE: If you have problems installing the Advanced Server Features, uninstall the
Microsoft Loopback Adapter before installing the Advanced Server Features. If
needed, you can reinstall the Microsoft Loopback Adapter afterwards. For more
information see “Installing the Microsoft Loopback Adapter Driver” on page 46.
NOTE: Before deleting Advanced Server Features, all teams and VLANs must
be deleted.