3Com 3C996-SX User Manual - page 57
Updating Mini-port (Core) Drivers
49
18 On SERVER-1, refresh the Server Manager dialog box. From the View menu, select
Refresh. The Server Manager dialog box now shows SERVER-2 as PRIMARY and
SERVER-1 as BACKUP.
19 Select SERVER-2.
20 From the Computer menu, select Synchronize with Primary Domain Controller.
21 Click Yes to start synchronization.
22 Click OK.
23 Restart SERVER-1.
24 Restart SERVER-2.
25 Verify that services are starting correctly. If the backup domain controller begins to
receive 7023 or 3210 errors after you synchronize the domains, correct the situation
as follows:
a On the primary domain controller, start Server Manager and select the backup
domain controller.
b Synchronize that specific backup domain controller with the primary domain
controller.
c After an event indicates that the synchronization is complete, restart the backup
domain controller.
Updating Mini-port (Core) Drivers
If you plan to update your network drivers and you are using an Advanced Server Feature
team, use the following procedures.
1 Right-click Network Neighborhood and choose Properties.
2 Select the Protocols tab.
3 Open the TCP/IP Protocol properties.
4 Write down the IP address information for the virtual NIC, and then click Cancel.
5 Click the Adapters tab.
6 Highlight the network adapter, and then click Update.
7 Type the path to the updated driver, and then click Continue.
Example: E:\
8 Open the Advanced Server Features driver properties.
9 Click Save.
10 Type a filename to save the team information to be used during a restore, and then
click OK.
11 Select a team, and then click Delete Team. Click OK to remove the team.
12 Click Close, and then click Yes to restart the computer.
13 After the machine restarts, right-click Network Neighborhood and choose Properties.
14 Select the Protocols tab.
CAUTION: Failure to use the following procedure might result in loss of network
connectivity before and after a system reboot.