3Com 3CR17251-91 - Switch 5500G-EI Stackable Gigabit Ethernet Getting Started Manual - page 94
94
C
HAPTER
6: U
PGRADING
S
OFTWARE
Free Space: 10469376 bytes
The current application file is s4b03_01_04s56.app
(*)-with main attribute; (b)-with backup attribute
(*b)-with main and backup attribute
This option displays all the files in flash and also indicates the file that the
Switch is currently set to boot from (marked with an asterix). A ‘b’ by the
file number indicates the file is a backup boot file.
The files which are required by the Switch are:
s4h01_04.web
3comoscfg.def
3comoscfg.cfg
s4b03_01_04s56.app
The
s4b03_01_04s56.app file is the boot software. The name of this
file will vary depending on the Switch type and the release version.
If the filename is in brackets, for example
[test.cfg]
, this indicates
that the file has been deleted from the CLI but is still present in the
recycle-bin.
Any additional files should be considered for deletion to allow maximum
space for downloading the new files.
4 To delete a file from the list select option 4 from the Boot Menu and
select the file number you wish to delete.
TFTP
To upgrade software to your Switch via TFTP, do the following:
1 From the Boot Menu, select option 1 (Download application file to flash)
to display the following:
1. Set TFTP protocol parameter
2. Set FTP protocol parameter
3(*)
4649088
s4b03_01_04s56.app
4
576218
s4h01_04.web
5
10301
3comoscfg.def
6
10369
3comoscfg.cfg
7
10369
[test.cfg]
File Number
File Size(bytes) File Name