DL manuals
3Com
Wireless Access Point
3CRWE820096A - Wireless LAN Access Point 8200
Quick Start Manual

3Com 3CRWE820096A - Wireless LAN Access Point 8200 Quick Start Manual

Other manuals for 3CRWE820096A - Wireless LAN Access Point 8200: User Manual, Datasheet

Manual is about: Wireless LAN Access Points

Page of 9

Download

Print this page

Bookmark us

Quick Start Guide

Wireless LAN Access Point

8200/8500/8700

3CRWE820096A

3CRWE850075A

3CRWE870075A

The 3Com Wireless LAN Access Point 8200 , Access Point 8500, and Access Point 8700 offer enterprise

network standard based security and complete centralized management, with flexible and expansive

connectivity and scalability. They extend networks and boost productivity for centrally managed

enterprises requiring scalable security solutions.

NOTE:

This product must be installed by a professional technician/installer.

Caution:

Do not connect a telephone cable into the Console port; doing so can cause

serious damage to the access point.

LEDs

Reset

button

Console port

Ethernet port

Access Point 8500

Access Point 8200/8700

09-2292-00AC.fm Page 1 Tuesday, March 11, 2003 3:53 PM

1 2 3 4 5 6 7 Next › »

Summary of 3CRWE820096A - Wireless LAN Access Point 8200

Page 1
Quick start guide wireless lan access point 8200/8500/8700 3crwe820096a 3crwe850075a 3crwe870075a the 3com wireless lan access point 8200 , access point 8500, and access point 8700 offer enterprise network standard based security and complete centralized management, with flexible and expansive conne...
Page 2
1 before you start ■ make sure that you have the following items ready for the installation: ■ 3com access point 8200, access point 8500, or access point 8700 ■ standard detachable antennas (access point 8200 or access point 8700) ■ 3com installation cd ■ ethernet category 5 straight cables (8-wire)...
Page 3
The installation cd includes the user guide, which contains more detailed information on planning, installing and configuring the device. Additional tools and utilities are provided to assist with the management of your network. See “documentation and software utilities” on page 7 for instructions. ...
Page 4
4 to link the access point to your ethernet network, plug one end of another ethernet cable into the port labeled to hub/switch on the power supply, and plug the other end into a lan port (on a hub or in a wall). Using a power-over-ethernet lan port if your lan equipment complies with the ieee 802.3...
Page 5
5 wall mount installation 1 install the mounting plate as shown in the following illustration, on either a stud (or other hard wall surface), or onto drywall. ■ allow for a clearance of at least 25 cm (10 inches) between the ceiling and the top of the mounting plate. ■ make sure that “up” is correct...
Page 6
6 flat surface installation 1 find a clean and dry surface that is elevated enough to provide good reception and coverage for the network. Do not place the access point on a metal surface. 2 make sure to choose a location where the access point will not be disturbed. 3 connect the ethernet cable int...
Page 7
8 documentation and software utilities the installation cd includes documentation and software utilities to help you set up and administer the wireless components of your network. To view product documentation, select view the documentation from the cd startup menu and then select the item you wish ...
Page 8
Copyright © 2003 3com corporation. All rights reserved. 3com, the 3com logo, and superstack are registered trademarks of 3com corporation. All other company and product names may be trademarks of the respective companies with which they are associated. 09-2292-000 rev ac published march 2003 additio...
Page 9
Copyright © 2003 3com corporation. All rights reserved. 3com, the 3com logo, and superstack are registered trademarks of 3com corporation. All other company and product names may be trademarks of the respective companies with which they are associated. 09-2292-000 rev ab published february 2003 inte...