3Com 3CRWX315075A - Wireless LAN Managed Access Point 3150 Quick Start Manual - page 11
11
R
EGULATORY
I
NFORMATION
The 3Com WLAN Managed AP3150, Model AP3150 (3CRWX315075A) must be installed and used in strict
accordance with the manufacturer’s instructions as described in the user documentation that comes with the
product.
This product contains encryption. It is unlawful to export out of the U.S. without obtaining a U.S. Export
License.
This product does not contain any user serviceable components. Any unauthorized product changes or
modifications will invalidate 3Com’s warranty and all applicable regulatory certifications and approvals.
This product must be installed by a professional technician/installer.
Only antennas specified for your region by 3Com can be used with this product. The use of external amplifiers or
non-3Com antennas may invalidate regulatory certifications and approvals.
This product can be used with the following antennas and accessories:
Suitable RF power levels for internal and external antennas are handled automatically by your 3Com Wireless
Switch or Controller. Ensure that the switch or controller configuration is modified to use the antenna that is
connected to the Access Point. Refer to the Mobility System Configuration Guide or to the 3Com Wireless LAN
Switch Reference Manual to modify the access point settings.
CAUTION: E
XPOSURE
TO
R
ADIO
F
REQUENCY
R
ADIATION
This device generates and radiates radio-frequency energy. In order to comply with FCC radio-frequency
exposure guidelines for an uncontrolled environment, this equipment must be installed and operated while
maintaining a minimum body to antenna distance of 20 cm (approximately 8 in.).
The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not
emit RF field in excess of Health Canada limits for the general population; consult Safety Code 6, obtainable
from Health Canada’s website www.hc-sc.gc.ca/rpb.
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. End users
must follow the specific operating instructions for satisfying RF exposure compliance. This equipment should be
installed and operated with minimum distance 20 cm between the radiator and your body.
This product must maintain a minimum body to antenna distance of 20 cm. Under these conditions this product
will meet the Basic Restriction limits of 1999/519/EC [Council Recommendation of 12 July 1999 on the limitation
of exposure of the general public to electromagnetic fields (0 Hz to 300 GHz)].
Item
Description
Restrictions
—
Supplied antenna
3CWE591
3Com 6/8dBi Dual-Band Omni Antenna
Must be used with 3CWE586 and one of
the following: 3CWE580, 3CWE581 or
3CWE582.
3CWE592
3Com 3/4dBi Dual-Band Ceiling Mount
Antenna
Must be used with 3CWE586 and one of
the following: 3CWE580, 3CWE581 or
3CWE582.
3CWE597
3Com 4/6dBi Dual-Band Hallway Antenna
Must be used with 3CWE586 and one of
the following: 3CWE580, 3CWE581 or
3CWE582.
3CWE598
3Com 8/10dBi Dual-Band Panel Antenna
Must be used with 3CWE586 and one of
the following: 3CWE580, 3CWE581 or
3CWE582.
3CWE580
3Com Ultra Low Loss 6-Foot Antenna Cable
Must also use 3CWE586. Cannot be used
with supplied antenna.
3CWE581
3Com Ultra Low Loss 20-Foot Antenna Cable Must also use 3CWE586. Cannot be used
with supplied antenna.
3CWE582
3Com Ultra Low Loss 50-Foot Antenna Cable
Must also use 3CWE586. Cannot be used
with supplied antenna.
3CWE586
3Com RSMA to SMA 6-inch Antenna Cable
Required for all external antennas, except
that supplied with the Access Point.
i