3Com 4200G PWR Command Reference Manual - page 14
14
3Com Switch 4200G Family
Command Reference
display protocol-priority
Use the
display protocol-priority
command to display the priority of protocol packets.
Any view
display protocol-vlan interface
Use the
display protocol-vlan interface
command to display the protocol information and protocol
indexes configured for specified ports.
Any view‘
display protocol-vlan vlan
Use the
display protocol-vlan vlan
command to display the protocol information and protocol indexes
configured for specified VLANs.
Any view
display qos cos-drop-precedence-map
Use the
display qos cos-drop-precedence-map
command to display the "COS->Drop-precedence"
mapping relationship.
Any view
display qos cos-dscp-map
Use the
display qos cos-dscp-map
command to display the "COS->DSCP" mapping relationship.
Any view
display qos cos-local-precedence-map
Use the
display qos cos-local-precedence-map
command to view the COS–>Local-precedence map.
Any view
display qos dscp-cos-map
Use the
display qos dscp-cos-map
command to display the "DSCP->802.1 priority" mapping relationship.
Any view
display qos dscp-drop-precedence-map
Use the
display qos dscp-drop-precedence-map
command to display the "DSCP->Drop-precedence"
mapping relationship.
Any view
display qos dscp-dscp-map
Use the
display qos dscp-cos-map
command to display the "DSCP->DSCP" mapping relationship.
Any view
display qos dscp-local-precedence-map
Use the
display qos dscp-local-precedence-map
command to display the "DSCP->Local-precedence"
mapping relationship.
Any view
display qos-interface all
Use the
display qos-interface all
command to display all the QoS settings of the port.
Any view
display qos-interface priority-trust
Use the
display qos-interface priority-trust
command to display the precedence mapping mode of
the switch.
Any view
display qos-interface traffic-limit
Use the
display qos-interface traffic-limit
command to view the traffic limit settings.
Any view
display qos-interface traffic-shape
Use the
display qos-interface traffic-shape
command to view the parameter configurations of traffic
shaping on the port.
Any view
display qos-interface traffic-statistic
Use the
display qos-interface traffic-statistic
command to view the traffic statistics.
Any view
display qos-profile
Use the
display qos-profile
command to view the configurations of the QoS profile.
Any view
display queue-scheduler
Use the
display queue-scheduler
command to view queue scheduling mode and corresponding
parameters.
Any view