3Com 7250 Quick Start Manual

Other manuals for 7250: User Manual, Conversion Manual, Datasheet

Summary of 7250

  • Page 1

    Quick start guide wireless lan access point 7250 3crwe725075 1 the 3com wireless lan access point 7250 offers enterprise network standard based security and complete centralized management, with flexible and expansive connectivity and scalability. It extends networks and boosts productivity for cent...

  • Page 2

    2 1 before you start ■ make sure that you have the following items ready for the installation: ■ 3com access point 7250 ■ standard detachable antennas ■ power supply ■ power cord ■ 3com installation cd ■ ethernet category 5 straight cables (8-wire) ■ for wall-mount installations you will need the fo...

  • Page 3

    3 the installation cd includes the user guide, which contains more detailed information on planning, installing and configuring the device. Additional tools and utilities are provided to assist with the management of your network. See “documentation and software utilities” on page 7 for instructions...

  • Page 4

    4 using an optional power-over-ethernet injector the power-over-ethernet injector can be located at any point between the access point and the lan access port, wherever a convenient power outlet exists. If you supply your own ethernet cable for connecting power, be sure that it is standard category ...

  • Page 5

    5 4 check the leds when power is connected, the access point leds light up. The illustration and the following table describe the leds and their functions. 5 wall mount installation 1 install the mounting plate as shown in the following illustration, on either a stud (or other hard wall surface), or...

  • Page 6

    6 ■ if you have routed the ethernet cable through the center opening, secure the cable on the hook located on the mounting plate as shown in the illustration below. 2 connect the ethernet cable to the ethernet port on the access point. 3 connect the power cable to the power port on the rear panel of...

  • Page 7

    7 7 antenna adjustment position the antennas so that they turn away from the access point at approximately a 45-degree angle. Your particular location might require additional antenna adjustment. 8 documentation and software utilities the installation cd includes documentation and software utilities...

  • Page 8

    Copyright © 2003 3com corporation. All rights reserved. 3com, the 3com logo, and superstack are registered trademarks of 3com corporation. All other company and product names may be trademarks of the respective companies with which they are associated. 09-2340-000 rev aa published december 2003 8 9 ...