3Com Access Builder 7000 User Manual - page 33

Installing The Module

2-3

No connecting cables are supplied with the Bridge/Router Module as 

standard. Check that you have suitable cables for any connections you 

want to make to any of the following ports:

■

ISDN port (BRI Bridge/Router Module only).

■

LAN port.

■

WAN port

See 

Appendix A

 for cable pin-outs and types.

CAUTION:

 At all times, take care not to touch any of the connectors or 

components on the cards to avoid damage by static electricity. Handle 

the cards by the handles or by their edges. Use an anti-static wrist strap 

during installation if you have one available.